HMC710LC5 v02.0109 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Typical Applications Features The HMC710LC5 is ideal for: High Conversion Gain: 12 dB • Point-to-Point and Point-to-Multi-Point Radio Sideband Rejection: -20 dB • Military Radar, EW & ELINT 2 LO to RF Isolation: 12 dB • Satellite Communications Output IP3: +30 dBm • Sensors RoHS Compliant 5x5 mm SMT Package Functional Diagram General Description The HMC710LC5 is a compact GaAs MMIC I/Q upconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of 12 dB with -20 dB of sideband rejection. The HMC710LC5 utilizes a driver amplifier preceded by an I/Q mixer where the LO is driven by an active x2 multiplier. IF1 and IF2 mixer inputs are provided and an external 90° hybrid is needed to select the required sideband. The I/Q mixer topology reduces the need for filtering of the unwanted sideband. The HMC710LC5 is a much smaller alternative to hybrid style single sideband upconverter assemblies and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, IF = 1000 MHz, LO = +6 dBm, Vdd1, 2, 3 = +5V, Idd2 + Idd3 = 150 mA [1][3] Parameter Min. Frequency Range, RF Typ. Max. GHz Frequency Range, LO 7.5 - 11 GHz Frequency Range, IF DC - 3.5 GHz 7 12 dB -12 -20 dB 20 dBm Conversion Gain Sideband Rejection 1 dB Compression (Output) 2 LO to RF Isolation 12 dB 2 LO to IF Isolation [2] 20 dB IP3 (Output) 30 dBm Supply Current Idd1 52 90 108 Supply Current Idd2 24 30 mA Supply Current Idd3 96 120 mA [1] Unless otherwise noted all measurements performed with high side LO, IF = 1000 MHz and external 90° IF hybrid. [2] Data taken without external IF hybrid. [3] Adjust Vgg between -2 to 0V to achieve Idd2 + Idd3 = 150 mA Typical. 8 - 284 Units 16 - 21 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com mA HMC710LC5 v02.0109 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Data Taken as SSB Upconverter with External IF Hybrid Conversion Gain vs. LO Drive 20 20 18 18 16 14 12 10 8 +25 C +85 C -40 C 6 +3 dBm +6 dBm +9 dBm 16 12 10 8 6 4 4 16 17 18 19 20 21 22 16 17 18 RF FREQUENCY (GHz) 20 21 22 21 22 Conversion Gain vs. Idd2 + Idd3 20 20 18 18 IF = 100MHz IF = 1000MHz 16 CONVERSION GAIN (dB) CONVERSION GAIN (dB) 19 RF FREQUENCY (GHz) Conversion Gain vs. IF Frequency 14 12 10 8 6 Idd1+Idd2 = 110mA Idd1+Idd2 = 130mA Idd1+Idd2 = 150mA 16 14 12 10 8 6 4 4 15 16 17 18 19 20 21 22 23 24 16 17 18 RF FREQUENCY (GHz) 19 20 RF FREQUENCY (GHz) IF Return Loss [1] RF, LO Return Loss 0 0 -5 RETURN LOSS (dB) RF LO -5 RETURN LOSS (dB) 8 14 -10 -15 -20 -10 -15 -20 IF1 IF2 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT CONVERSION GAIN (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature -25 -25 -30 2 4 6 8 10 12 14 16 FREQUENCY (GHz) 18 20 22 24 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) [1] Data taken without external IF hybrid For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 285 HMC710LC5 v02.0109 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Data Taken as SSB Upconverter with External IF Hybrid Side Band Rejection Output P1dB vs. Temperature 0 24 -10 P1dB (dBm) 22 -20 -30 20 19 18 -40 +25 C +85 C -40 C 16 16 17 18 19 20 21 22 16 17 RF FREQUENCY (GHz) 19 20 21 22 21 22 21 22 Output IP3 vs. LO Drive 34 34 32 32 IP3 (dBm) IP3 (dBm) Output IP3 vs. Temperature 30 28 +25 C +85 C -40 C 26 18 RF FREQUENCY (GHz) 30 +3 dBm +6 dBm 28 26 24 24 16 17 18 19 20 21 22 16 17 RF FREQUENCY (GHz) 18 19 20 RF FREQUENCY (GHz) Output IP3 vs. IF Frequency Output IP3 vs. Idd2 + Idd3 34 34 IF = 100MHz IF = 1000MHz 32 IP3 (dBm) 32 30 28 26 30 28 Idd1+Idd2 = 110mA Idd1+Idd2 = 130mA Idd1+Idd2 = 150mA 26 24 24 16 17 18 19 20 RF FREQUENCY (GHz) 8 - 286 21 17 CONVERSION GAIN (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 CONVERSION GAIN (dB) 23 21 22 16 17 18 19 20 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC710LC5 v02.0109 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Isolations with LO [1] 0 0 -10 -10 -20 -20 2LO/RF IF1/RF 2LO/IF1 IF2/RF 2LO/IF2 -40 -40 -50 -50 -60 -60 -70 8 -30 LO/RF LO/IF1 LO/IF2 -70 16 17 18 19 20 21 22 16 17 18 RF FREQUENCY (GHz) 19 20 21 22 RF FREQUENCY (GHz) MxN Spurious Outputs [1] Harmonics of LO nLO nLO Spur @ IF Port mIF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 19 48 xx xx 8 42 21 25 64 1 61 0 66 xx xx 9 35 24 47 50 2 35 32 53 xx xx 10 38 19 49 47 3 61 38 72 xx xx 11 42 25 44 51 4 52 62 73 xx xx 12 34 18 50 xx IF = 1 GHz @ 0 dBm 13 39 32 55 xx LO = 9.75 GHz @ +6 dBm 14 22 35 52 xx Data taken without IF hybrid All values in dBc below RF power level (-1IF + 2LO) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT -30 ISOLATION (dB) ISOLATION (dB) Isolations with 2LO [1] [1] Data taken without external IF hybrid For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 287 HMC710LC5 v02.0109 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Absolute Maximum Ratings MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 8 - 288 Drain Bias Voltage (Vdd1, 2, 3) 5.25V Gate Bias Voltage (Vgg) -3 to 0V IF Input Power (IF1, IF2) 20 dBm LO Drive (LO IN) 20 dBm Channel Temperature 175 °C Continuous Pdiss (T = 85°C) (derate 16.2 mW/°C above 85°C) 1.46 mW Thermal Resistance (channel to ground paddle) 61.8 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC710LC5 v02.0109 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Typical Application C1 - C3 100 pF C4 - C7 1000 pF C8 - C11 2.2 μF For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 8 - 289 HMC710LC5 v02.0109 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Pin Descriptions MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 8 - 290 Pin Number Function Description 1 - 5, 7, 8, 11, 16, 17, 19, 20, 22 - 28 N/C No Connection required. These pins may be connected to RF/DC ground without affecting performance. 6 Vdd1 Power supply voltage for x2 multiplier. See application circuit for required external components. 9 LOIN This pin is AC coupled and matched to 50 ohms. 10, 13, 15, 30, 32 GND These pins and package bottom must be connected to RF/DC ground. 12 Vgg Gate control for RF amplifier, please follow “MMIC Amplifier Biasing Procedure” application note. See application circuit for required external components 14 RFOUT This pin is AC coupled and matched to 50 ohms. 18, 21 Vdd2, Vdd3 Power supply voltage for RF amplifier. See application circuit for required external components. 29 IF1 31 IF2 Differential IF input pins. For applications not requiring operation to DC, an off chip DC blocking capacitor should be used. For operation to DC this pin must not source/sink more than 3mA of current or part non function and possible part failure will result. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC710LC5 v02.0109 GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz Evaluation PCB List of Materials for Evaluation PCB 120412 [1] Item Description J1, J2 PCB Mount SMA SRI Connector J3, J4 PCB Mount SMA Connector J5 - J12 DC Pin C1 - C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0402 Pkg. C5 - C7 1000 pF Capacitor, 0603 Pkg. C8 - C11 2.2 μF Tantalum Capacitor Case A U1 HMC710LC5 Upconverter PCB [2] 120410 Evaluation Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR, FR4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 291