VER:2.0 HRPF0030 RELATIVE PRESSURE SENSOR (0-30kPa) 0 to 30kPa gage pressure range MEMS technique relative pressure sensor High sensitivity, high linearity Low cost SMD package RoHS-compatible & Pb-free DESCRIPTION The HRP series is a relative pressure sensor module, The design of the pressure sensor in the module is based on MEMS IC technology. The technology assures PN junction reverse current < 10–10A. The module has good linearity, sensitivity and high reliability. FEATURES Uncompensated pressure sensor Temperature Range -30°C ~ +135°C Small size Low Cost, High reliability APPLICATION • breathing measurement • pulse measurement • high speed analysis for small amounts of material • pressure switch • environment control • liquid level control • Filter Blocked Sensor • HVAC fan control • leakage detection systems Part number System Package HRP F 0030 Pressure type Tel: +86-755-82973805 Fax: +86-755-82973550 Pressure range - 1 - E-mail: [email protected] http://www.hoperf.cn VER:2.0 Electrical Characteristics Min Typical Max. Unit Item Pressure Range 4PSI Supply voltage 0 5.0 10.0 Volts currency 0 1.5 3.0 mA Span 70 100 130 mV Offset -30 0 30 mV Temperature coefficient -16 -22 -28 %FS/100℃ -4 -6 -8 %FS/100℃ +0.2 %F.S 6.0 KΩ 2× Rated FS Temperature Zero coefficient of Nonlinearity -0.2 Bridge resistance 4.0 5 Proof pressure Operating temperature -40 125 ℃ Storage temperature -40 125 ℃ Pin Configuration （SMD Pressure sensor） VI+ VO- VO+ VI- Pin Name 1 VI- GND 2 VO- Negative output 3 VI+ Supply votage 4 VO+ Positive output Tel: +86-755-82973805 Comment Fax: +86-755-82973550 - 2 - E-mail: [email protected] http://www.hoperf.cn VER:2.0 FR4 Package Outlines（all measures in mm） This document may contain preliminary information and is subject to change by Hope Microelectronics without notice. Hope Microelectronics assumes no responsibility or liability for any use of the information contained herein. Nothing in this document shall operate as an express or HOPE MICROELECTRONICS CO.,LTD implied license or indemnity under the intellectual property rights of Hope 4/F, Block B3, East Industrial Area, Microelectronics or third parties. The products described in this document Huaqiaocheng, Shenzhen, Guangdong, are not intended for use in implantation or other direct life support China applications where malfunction may result in the direct physical harm or Tel: injury to persons. NO WARRANTIES OF ANY KIND, INCLUDING, BUT 86-755-82973805 Fax: Email: NOT LIMITED TO, THE IMPLIED WARRANTIES OF MECHANTABILITY 86-755-82973550 OR FITNESS FOR A ARTICULAR PURPOSE, ARE OFFERED IN THIS [email protected] Website: http://www.hoperf.com DOCUMENT. http://www.hoperf.cn http://hoperf.en.alibaba.com Tel: +86-755-82973805 ©2006, HOPE MICROELECTRONICS CO.,LTD. All rights reserved. Fax: +86-755-82973550 - 3 - E-mail: [email protected] http://www.hoperf.cn