2322 Series HIGH VOLTAGE POWER SUPPLIES FEATURES y y y y y y • • • Non-Metallic Case Cost Effective Reliable Solid State Design Maintenance Free Automatic Over Current Shutdown and Recovery High Frequency Switch-mode Design UL Recognized Versions Available RoHS Versions Available Formerly CS2322 Series TYPICAL APPLICATIONS y y Electrostatic Air Cleaners Electrostatic Oil Cleaners DESCRIPTION TYPICAL ELECTRICAL SPECIFICATIONS The 2322 series of regulated solid state switching power supplies is designed for applications requiring a medium duty High Voltage power supply. Input voltage is 120 VAC (±10%), 50/60 Hz. Connection for "HV On" indicating LED is provided. The 2322 series is packaged in a nonmetallic enclosure and may be installed in any position. Consult the factory for additional information. NOTICE: This power supply requires adequate ground connection for operation. Failure to provide ground could result in failure of the power supply. Proper ground connections must be made to input terminal on the non-metallic case. 3227 Skylane Drive Carrollton, TX 75006 y y y y y y y y y Input Voltage: 120VAC (±10%) Input Frequency: 50/60 Hz Output Voltage: 12 kVDC Output Current: 1.5 mA Typical Output Power: 20 W Max Output Regulation: See Typical V-I Curve Load: May be operated into any load condition (capacitive, resistive or inductive) or no load. Can withstand arcing and short circuits. Isolated Output; High Voltage Referenced to Earth Ground TYPICAL MECHANICAL SPECIFICATIONS y Case: Glass filled Noryl, UL 94V-1 Rated y Encapsulant: Filled Epoxy, UL 94V-0 Rated y Input Voltage Termination: ¼" black insulated terminals y "HV On" Indicating Light Termination: ¼" black insulated terminals y High Voltage Termination: ¼" red insulated terminals y Temperature Rating: Operating 0º to +60ºC Storage -40º to +85ºC 972-248-7691 www.hvpsi.com Rev.3 Specifications subject to change without prior notification 2322 Series HIGH VOLTAGE POWER SUPPLIES INPUT VOLTAGE VAC ACN2322L10 120 10.0 kV 5.0kV neg 1.75 ACP2322L10 120 10.0 kV 5.0kV pos 1.75 ACN2322L12 120 12.0 kV 6.0kV neg 1.75 ACP2322L12 120 12.0 kV 6.0kV pos 1.75 STANDARD MODELS COLLECTOR VOLTAGE kVDC MAX OUTPUT CURRENT mADC IONIZER VOLTAGE kVDC Formerly CS2322 Series 2322 SERIES TYPICAL V-I CURVE (Input 120VAC) 14 HV OUTPUT (kVDC) 12 10 8 6 4 2 0 0 0.5 1 1.5 2 Iout (mA) 3227 Skylane Drive Carrollton, TX 75006 972-248-7691 www.hvpsi.com Rev.3 Specifications subject to change without prior notification