2422 Series HIGH VOLTAGE POWER SUPPLIES FEATURES y y y y y y y y y Metal Case Cost Effective Reliable Solid State Design Maintenance Free Automatic recovery, self restoring High Frequency Switch-mode Design UL Version Available RoHS Version Available Formerly CS2422 Series TYPICAL APPLICATIONS y Electrostatic Air Cleaners y Electrostatic Oil Cleaners DESCRIPTION The 2422 series of regulated solid state switching power supplies is designed for applications requiring a medium duty high Voltage power supply. Input is 120 VAC (±10%), 50/60 Hz. Dual output standard (separate ionizer and collector connectors ). Connection for a "HV On" indicating LED is provided. The 2422 series is packaged in a metal enclosure and may be installed in any position. Custom models are available. Some models are certified UL Recognized. Consult factory for additional information. NOTICE: This power supply requires adequate ground connection for operation. Failure to provide ground could result in failure of the power supply. Proper ground connections must be made to #8-32 ground screw on the metal case. 3227 Skylane Drive Carrollton, TX 75006 TYPICAL ELECTRICAL SPECIFICATIONS FOR A STANDARD MODEL y Input Voltage: 120 VAC (± 10%) 50/60 Hz y Output Voltage: 10 kVDC y Output Current: 3.3 mA Max. Operating y Output Power: 75 W Max Output Regulation: See Typical V-I Curve y Load: May be operated into any load condition (capacitive, resistive or inductive) or no load. Can withstand arcing and short circuits. y Isolated Output; High Voltage referenced to Earth Ground TYPICAL MECHANICAL SPECIFICATIONS y Case: Metal y Input Voltage Termination: ¼" black insulated terminals y "HV On" Indicating Light Termination: ¼" insulated terminals for LED y High Voltage Termination: ¼" red insulated terminals y Earth Ground: #8-32 screw y Temperature Rating: Operating 0º to +60ºC Storage -40º to +85ºC 972-248-7691 Specifications subject to change without prior notification www.hvpsi.com Rev.1 2422 Series HIGH VOLTAGE POWER SUPPLIES INPUT MAX MAX IONIZER VOLTAGE kV DC COLLECTOR VOLTAGE kV DC MAX OUTPUT CURRENT mA DC VOLTAGE VAC INPUT FREQ. Hz ACN2422L10 120 50/60 10 kVDC Neg 5.0 kVDC Neg 3.3 ACP2422L10 120 50/60 10 kVDC Pos 5.0 kVDC Pos 3.3 STANDARD MODELS Formerly CS2422 Series OUTPUT VOLTAGE, kVDC 2422 SERIES TYPICAL PERFORMANCE CHARACTERISTIC OUTPUT VOLTAGE vs OUTPUT CURRENT Input V = 120 VAC 12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 OUTPUT CURRENT, mADC 3227 Skylane Drive Carrollton, TX 75006 972-248-7691 www.hvpsi.com Rev.3 Specifications subject to change without prior notification