Memory Module Specification KVR133X72RC3/1024A PC133 Registered SDRAM 168-Pin ECC DIMM Memory Module DESCRIPTION: This document describes ValueRAM's 128M x 72-bit (1024MB) PC133 CL3 (CAS Latency 3) Registered SDRAM (Synchronous DRAM) memory module. The components on this module include eighteen stacked 128M x 4-bit SDRAM PC133 components. This 168-pin DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows: FEATURES: CLK Cycle Time (tCK) Row Cycle Time (tRC) CLK to Output (tAC) Single Power Supply of Power UL Rating min. = 7.5ns (CAS Latency = 3) / max. = 1000ns 65ns max. = 5.4ns (CAS Latency = 3) +3.3V (+/- .3V) 10.560 W (operating) 94 V - 0 5.250 (133.350) R 0.079 (R 2.000) 0.350 (8.890) REG PLL B A 0.250 (6.350) .450 (11.430) C 0.250 (6.350) 1.450 (36.830) 2.150 (54.61) 0.100 Min (2.540 Min) .118DIA ± 0.004 (3.000DIA ± 0.100) REG 0.700 (17.780) 0.157 ± 0.004 (4.000 ± 0.100) 0.118 (3.000) 1.700 (43.18) 0.054 (1.372) 5.014 (127.350) 0.118 (3.000) 4.550 (115.57) 0.254 Max (6.452 Max) (3.99 Min) 0.157 Min REG Units : Inches (Millimeters) 0.050 ± 0.0039 (1.270 ± 0.10) Figure 1: KVR133X72RC3/1024A 168-Pin SDRAM Module Part No. VALUERAM0202-001.A00 08/24/01