AC/DC Plug & Play Power Supply Series 400W-1200W Standard cite AC/DC Power Supply patents pending Ultra-high efficiency 1U size The Xcite family of power supplies provides up to an incredible 1200W in an extremely compact 1U x 260 x 127mm package. Boasting industry leading power density of 15W/in3 and efficiencies of up to 90%, the Xcite family employs an innovative plug & play architecture that allows users to instantly configure a custom power solution in less than 5 minutes! next generation power source FEATURES • • • • • • • • • • • 1.5V to 58V standard output voltages All outputs fully floating Extra low profile: 1U height (40mm) Ultra high efficiency, up to 90% Plug & Play Power - allows fast custom configuration - allow easy logistics Reduced system heat dissipation Few electrolytic capacitors (all long life) Visual LED indicators Series / Parallel of multiple outputs 5V bias standby voltage provided Individual output control signals APPLICATIONS INCLUDE • • • • • • Industrial machines Test and measurement Automation equipment Printing Telecommunications For Medical applications see Xvite Ultra high efficiencies and high power density are made possible through the combination of low loss technologies and the best field-proven technologies in planar magnetics and surface mount electronics. Significantly increased efficiency reduces system thermal load by more than 50%. The Xcite family consists of 4 powerPac models ranging in power levels from 400W to 1200W. Each model may be populated with up to 6 powerMods selected from the table of powerMods shown below. All configurations carry full safety agency approvals, UL60950, EN60950 and are CE marked. For alternative power interfaces contact [email protected] powerMods MODEL Vmin Vnom Vmax Imax Xg1 1.5 2.5 Xg2 3.2 Xg3 6.0 Xg4 12.0 Xg5 28.0 Xg7 Xg8 V1 V2 EFFICIENCY (typical) powerPacs Watts MODEL Watts 3.6 50A 125W XCA 400W 5.0 6.0 40A 200W XCB 700W 12.0 15.0 20A 240W XCC 1000W 24.0 30.0 10A 240W XCD 1200W 48.0 58.0 6A 288W 5.0 24.0 28.0 5A 120W 5.0 5.0 24.0 24.0 28.0 28.0 3A 3A 72W 72W Xcite PLUG & PLAY POWER MECHANICAL SPECIFICATIONS 1 93 Third angle projection 92 50.00 90 46.00 89 97.75 122.00 92.00 23.50 SLOT F 88 INPUT AC 100V-240V 50/60Hz SEE INSTRUCTION MANUAL 70C MAX OPERATING TEMPERATURE 87 TOP VIEW 80.00 19.00 SLOT E 127.00 J2 86 85 19.00 J1 Efficiency % 91 19.00 84 70 85 100 115 130 145 160 175 190 205 220 SLOT A 23.50 40.40 29.50 All dimensions in mm. Mounting Holes 4 M4 threaded holes on Base. Max screw penetration is 6mm from Base. Series SLOT C SLOT B 235 260 Line Voltage VAC SLOT D Fleximount Side Mounting Slots Use with self-clinching studs type FH-M4-X or FH-832-X (X= stud length) from PEM, or equivalent Alternatively, use Xgen Side Clamps from Excelsys. Part No. Z165 (drawing 61401) 400W-1200W AC/DC Plug & Play Power Supply Series SPECIFICATION applies to configured units consisting of powerMods modules plugged into the appropriate powerPac INPUT Standard Parameter Input Voltage Range Conditions/Description Universal Input Min 85 120 47 Input Frequency Range Power Rating XCA XCB XCC XCD Input Current XCA XCB XCC, XCD Inrush Current Undervoltage Lockout Fusing XCA XCB XCC, XCD Derate linearly from 1000W at 100VAC to 850W at 85VAC Derate linearly from 1200W at 120VAC to 850W at 85VAC 85VAC in 400W out 85VAC in 700W out 85VAC in 850W out 230VAC @ 25°C Shutdown 250V 250V 250V Nom Max 264 380 63 400 700 1000 1200 25 74 Units VAC VDC Hz W W W W A A A A VAC Max Units ±0.1 ±0.2 10 250 1.0 125 120 A % % % µs % pk-pk % %. 7.5 9.5 11.5 65 F8A HRC F10A HRC F12A HRC OUTPUT Parameter powerMod Power Output Adjustment Range Minimum Load Line Regulation Load & Cross Regulation Transient Response Ripple and Noise Overvoltage Protection Overcurrent Protection Remote Sense Overshoot Turn-on Delay Rise Time Hold-up Time Output Isolation Conditions/Description As per powerMod table Manual: Multi-turn potentiometer. As per powerMod table Electronic: See Xgen Designers’ Manual Min Nom 0 For ±10% change from nominal line For 25% to 75% load change For 25% to 75% load change Voltage Deviation Settling Time 20MHz Bandwidth 1st level: Vset Tracking. 2nd level: Vmax (Latching) Straight line with hiccup activation at <30% of Vnom See Designer’s Manual for full details Max. line drop compensation. (except Xg7, Xg8) From AC In / Enable signal Monotonic For nominal output voltages at full load. XCA,XCB,XCC / XCD Output to Output / Output to Chassis 110 110 0.5 2 300 / 30 5 VDC % ms ms ms VDC Max Units VAC VAC % 1.5 mA 5.1 1.0 0.6 VDC fpmh fpmh 20 / 15 500 / 500 GENERAL Parameter Isolation Voltage Efficiency Safety Agency Approvals Leakage Current Signals Bias Supply Reliability Conditions/Description Input to Output Input to Chassis 230VAC, 1200W @ 24V EN60950, UL60950, CSA22.2 No.950 UL File No. E181875 250VAC, 60Hz, 25°C See Xgen Series datasheet Always ON. Current 250mA Failures per million hours at 25°C and full load powerMod See Designers’ Manual. powerPac excludes fans powerPac Min 3000 1500 Nom 90 4.9 5.0 EMC 2 Parameter Emissions Conducted Radiated Harmonic Distortion Flicker and Fluctuation Immunity Electrostatic Discharge Radiated RFI Fast Transients - burst Input Line Surges Conducted RFI Voltage Dips Standard Level EN55011, EN55022, FCC EN55011, EN55022, FCC EN61000-3-2 EN61000-3-3 Level B Level B Compliant Compliant EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-11 (EN55024) Level 4 Level 3 Level 4 Class 4 10 10 Units V/m ms ENVIRONMENTAL Parameter Operating Temperature Storage Temperature Derating Relative Humidity Shock Vibration NOTES Conditions/Description Min -20 -40 1.6% per °C above 40°C. See Designers Manual for full deratings Non-condensing 3000 Bumps, 10G (16ms) half sine 1.5G Nom Max +70 +85 Units °C °C 5 95 %RH 10 200 Hz 1. This product is not intended for use as a stand alone unit and must be installed by qualified personnel. 2. The specifications contained herein are believed to be correct at time of publication and are subject to change without notice. 3. All specifications at nominal input, full load, 25°C unless otherwise stated. Doc. 40032 rev. 05 08/07 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: [email protected] Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: [email protected]