GUR5H60, GURF5H60 & GURB5H60 Vishay General Semiconductor Ultrafast Rectifier FEATURES ITO-220AC TO-220AC • Glass passivated chip junction • Ultrafast recovery time • Low switching losses, high efficiency • High forward surge capability 2 2 1 1 GUR5H60 GURF5H60 PIN 1 PIN 1 • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) CASE PIN 2 PIN 2 TO-263AB • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC K TYPICAL APPLICATIONS For use in high voltage and high frequency power factor corrector, freewheeling diodes and secondary dc-to-dc rectification application. 2 1 GURB5H60 PIN 1 PIN 2 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) K HEATSINK PRIMARY CHARACTERISTICS IF(AV) 5.0 A VRRM 600 V IFSM 90 A trr 30 ns VF 1.6 V TJ max. 150 °C MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum working reverse voltage VRWM 480 V Maximum RMS voltage VRMS 420 V Maximum DC blocking voltage VDC 600 V Maximum average forward rectified current IF(AV) 5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 90 A ER 10 mJ TJ, TSTG - 55 to + 150 °C VAC 1500 V Reverse energy Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Document Number: 88650 Revision: 06-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 GUR5H60, GURF5H60 & GURB5H60 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Maximum instantaneous forward voltage (1) IF = 5 A TJ = 25 °C TJ = 150 °C VF 1.8 1.6 V Maximum DC reverse current VRWM TJ = 25 °C TJ = 150 °C IR 20 400 µA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 30 ns Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case SYMBOL GUR GURF GURB UNIT RθJC 2.0 3.0 2.0 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.80 45 50/tube Tube TO-220AC GUR5H60-E3/45 ITO-220AC GURF5H60-E3/45 1.95 45 50/tube Tube TO-263AB GURB5H60-E3/45 1.33 45 50/tube Tube TO-263AB GURB5H60-E3/81 1.33 81 800/reel Tape and reel TO-220AC GUR5H60HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC GURF5H60HE3/45 (1) 1.95 45 50/tube Tube TO-263AB GURB5H60HE3/45 (1) 1.33 45 50/tube Tube TO-263AB GURB5H60HE3/81 (1) 1.33 81 800/reel Tape and reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88650 Revision: 06-Aug-07 GUR5H60, GURF5H60 & GURB5H60 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Forward Current (A) Average Forward Current (A) 6 5 GUR5H60 GURB5H60 4 3 GURF5H60 2 1 TJ = 100 °C 1 TJ = 25 °C 0.1 0.01 0 0 25 50 75 100 125 150 0 175 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Case Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 4. Typical Forward Voltage 2.0 1000 Junction Capacitance (pF) 100 Peak Forward Surge Current (A) TJ = 150 °C 10 80 60 40 20 0 1 10 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 10 1 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Junction Capacitance Instantaneous Reverse Current (µA) 1000 100 TJ = 150 °C 10 TJ = 100 °C 1 0.1 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 Percent of Peak Reverse Voltage (%) Figure 3. Typical Reverse Current Document Number: 88650 Revision: 06-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 GUR5H60, GURF5H60 & GURB5H60 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 0.384 0.076 (1.93) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.635 (16.13) 0.625 (15.87) 1 0.350 (8.89) 0.330 (8.38) 7° Ref. 0.191 (4.85) 0.171 (4.35) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.671 (17.04) 7° Ref. 0.651 (16.54) 0.350 (8.89) 0.330 (8.38) PIN 1.148 (29.16) 1.118 (28.40) 2 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) CASE PIN 2 0.105 (2.67) 0.095 (2.41) 0.110 (2.79) 0.100 (2.54) 2 1 Copper exposure 0.010 (0.25) Max. 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.190 (4.83) 0.170 (4.32) See note 7° Ref. 0.076 Ref. (1.93) Ref. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 45° Ref. 0.145 (3.68) 0.135 (3.43) PIN See note (10.26) (9.75) Ref. ref. 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) Note: Copper exposure is allowable for 0.005 (0.13) Max. from the body TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88650 Revision: 06-Aug-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1