OEM Bluetooth-Serial Module, ESD1000 Parani-ESD1000 Features • Bluetooth Specification v2.0 + EDR • Useful for Bluetooth-enabling users’ devices • Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm • Receiving Sensitivity : -88dBm(0.1%BER) • Supports Bluetooth profiles SPP(Serial Port Profile) • External interface for UART • Interoperability with PDA, laptops etc. • Supports firmware upgrade via windows-based software(ParaniUpdater) • Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna • Easy to use Windows configuration tool available. • No external drivers required. Pin Assignment Information Pin NO. Pin Name Direction - Description GROUND Signal Level 1 GROUND 2 N/A GROUND 3 N/A 4 N/A 5 BT_MODE IN Pairing signal TTL 6 FACTORY RESET IN Factory reset signal(Active ‘L’) TTL 7 LOW_BATT_INDICATOR OUT Low battery status(Active ‘L’) TTL 8 N/A IN Hardware reset signal(Active ‘L’) TTL Power(3.3V) POWER 9 HW_RESET 10 N/A 11 N/A 12 VCC IN 13 N/C - 14 GROUND - GROUND GROUND 15 GROUND - GROUND 16 GROUND - GROUND 17 UART_DCD OUT 18 UART_DSR IN is Class1 type Embedded Bluetooth Module for users to make their devices Bluetooth-enable. By default, it supports 100 meters of wireless transmit distance. The Parani-ESD1000 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports Bluetooth v2.0+EDR specification, and external interface UART. Users may configure the Parani-ESD1000 by using easy-to-use Windowsbased utility software or by using standard AT command set. Typical application areas of the Parani-ESD1000 include: - RS232 cable replacement - Truck/Bus monitoring system - Car Diagnostics - Wireless POS system - Wireless Machine(Healthcare/Industrial) monitoring - Wireless Factory monitoring - PLC programming - Wireless Printing - Wireless Logistics GROUND 1 28 GROUND N/A 2 27 N/A N/A 3 26 N/A GROUND N/A 4 25 N/A GROUND BT_MODE 5 24 N/A - UART DCD(data carrier detect) TTL UART DSR(data set ready) TTL FACTORY RESET 6 23 UART_RTS LOW_BATT_INDICATOR 7 22 UART_CTS 19 UART_DTR OUT UART DTR(data terminal ready) TTL 20 UART_RXD IN UART RXD(receive data) TTL N/A 8 21 UART_TXD 21 UART_TXD OUT UART TXD(transmit data) TTL HW_RESET 9 20 UART_RXD 22 UART_CTS OUT UART CTS(clear to send) TTL 23 UART_RTS IN UART RTS(ready to send) TTL N/A 10 19 UART_DTR N/A 11 18 UART_DSR 12 17 UART_DCD 24 N/A 25 N/A VCC 26 N/A N/C 13 16 GROUND 27 N/A GROUND 14 15 GROUND 28 GROUND www.sena.com - GROUND GROUND OEM Bluetooth-Serial Module, ESD1000 Specifications Serial Interface: - UART - 2mm Header 14 x 2 - Serial UART speed up to 921.6kbps - CTS/RTS flow control, DTR/DSR for loop-back & full transfer Bluetooth Interface: - Bluetooth v2.0 + EDR - Class 1 - Profiles: SPP - Working distance (in open field) SAT-G01R - SAT-G01R SAT-G01R - DAT-G01R DAT-G01R - DAT-G01R DAT-G01R - DAT5-G01R DAT-G01R - PAT-G01R DAT5-G01R - DAT5-G01R DAT5-G01R - PAT-G01R PAT-G01R - PAT-G01R Diagnostic LED: - TXD, RXD, RTS, CTS, DTR, DSR, DCD on Jig board Power: - 3.3VDC - Minimum: 10mA, Maximum : 60mA Environmental: 100 meters 150 meters 200 meters 300 meters 500 meters 400 meters 600 meters 1,000 meters [Antennas] SAT-G01R: +1dBi Stub Antenna DAT-G01R: +3dBi Dipole Antenna DAT5-G01R: +5dBi Dipole Antenna PAT-G01R: +9dBi Patch Antenna - Operating temperature: -30˚C to 80˚C - Storage temperature: -40˚C to 85˚C - Humidity: 90% Non-condensing Physical properties: - Dimension (L x W x H): 49 x 23 x 11 (mm) 1.93 x 0.9 x 0.43 ( in.) - Weight: 6g MTBF: 400.89 Years Regulatory Approvals: Receive Sensitivity: -88dBm - FCC Part 15 Subpart C Section 15.247 - EN 60950-1: 2001 - ETSI EN 300 328 - ETSI EN 301 489-1 - ETSI EN 301 489-17 - MIC (Type Registration) - TELEC (Type Certification) - SIG Antenna gain: Warranty: Max. Tx power: +18dBm - Stub: +1dBi, Dipole: +3dBi, Dipole: +5dBi, Patch: +9dBi - 1-year limited warranty Configuration: - ParaniWin, ParaniWizard, ParaniUpdater - Modem AT command set LED(SERIAL) Parani-ESD1000 Starter Kit The Parani-ESD1000 Starter Kit includes the evaluation board with the sample circuitry for Parani-ESD1000 interface, power, RS232 interface, H/W Reset, LEDs for users’ device development. Reserved RS232 SERIAL ON/OFF SWITCH ESD1000 (INTERFACE) Reserved Reserved POWER POWER SWITCH Ordering Information BT_MODE ESD1000 Parani-ESD1000 OEM Bluetooth-Serial Module-Class1 with antenna extension option ESD1000-00 Optional Accessories : - SAT-G01R Antenna: 1 dBi Stub Antenna- RP-SMA-Reverse right-hand thread - DAT-G01R Antenna: 3 dBi Dipole Antenna-RP-SMA-Reverse right-hand thread - DAT5-G01R Antenna: 5 dBi Dipole Antenna-RP-SMA-Reverse right-hand thread - PAT-G01R Antenna: 9 dBi Patch Antenna-RP-SMA-Reverse right-hand thread - SEC-G01R : 15cm Antenna Extension Cable-RP-SMA-Reverse right-hand thread - RFC-G01R: 1m Antenna Extension Cable-RP-SMA-Reverse right-hand thread for PAT-G01R ESD1000SK Parani-ESD1000 Starter Kit Includes: - Parani-ESD1000 Module - Jig board - DC Power Adapter - Serial data cable - Quick Start Guide - SAT-G01R Antenna: 1 dBi Stub Antenna- RP-SMA-Reverse right-hand thread - CD-ROM For more information, please visit us at http://www.sena.com Reserved FACTORY RESET LED (POWER) Reserved Reserved H/W RESET U.S. / Canada / South America Tel : +1 (408) 573-7425 Fax: +1 (408) 907-3738 EU / Africa Tel : +33 (0) 1 53 53 16 29 Fax: +33 (0) 1 70 24 70 90 Asia / Pacific Tel : +82-2-571-8283 Fax: +82-2-573-7710 Contact us via E-mail General Information : [email protected] Sales & Distribution : [email protected] Technical Support : [email protected] www.sena.com