Pan Overseas CERAMIC ▪ DISC ▪ CAPACITOR HOW TO ORDER – PART NUMBER EXPLANATION To Order, please specify Pan Overseas Part No. as the following example： CH U 5 100 J H H A ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ❶ Temperature Characteristics Code： T.C.(PPM/℃) or Cap. Change % CH (NPO) SL B (Y5P) E (Z5U) F (Z5V) X (X7R) RY (Y5R) FY (Y5V) 0 ± 60PPM + 350 - 12000PPM ± 10% + 22% -56% + 22% - 82% ± 15% ± 15% + 22% - 82% B T U A C M M2 M3 16V 25V 50V 100V 500V 1000V 2000V 3000V ❷ Rated Voltage： Voltage ❸ Part Diameter(mm)： Code Diameter Code Diameter Code Diameter Code Diameter 5 5mm 8 8mm A 11mm D 14mm 6 6mm 9 9mm B 12mm E 15mm 7 7mm 0 10mm C 13mm F 16mm ❹ Capacitance Code： ❺ Tolerance Code： Code Capacitance (pF) Code Capacitance (pF) Code Tolerance Code Tolerance 010 1 102 1000 C ± 0.25pF K ± 10% 1R5 1.5 222 2200 D ± 0.50pF M ± 20% 100 10 472 4700 J ± 5% Z + 80-20% 101 100 103 10000 ❻ Lead Configuration Code-Bulk & Taping Package Bulk Lead Code Taping Lead Code Configuration and Dimension Kinked / Straight Lead Space (F) Lead Length (L) 2 Straight 5.0mm 5±1mm 5 Straight 2.5mm 25 mm Min. Straight 5.0mm 25mm Min. 7 Straight 6.4mm 25mm Min. 8 Inside Kinked 5.0mm 5±1mm Inside Kinked 5.0mm 25 mm Min. A Straight 10.0mm 5±1mm B Inside Kinked 10.0mm 5±1mm C Straight 10.0mm 25 mm Min. 6 9 G or L H or R Remarks G = Ammo, L = Reel H = Ammo, R = Reel ❼ High temperature soldering type. ❽ Epoxy coating material is used on 2KV & 3KV parts only. 13 Pan Overseas CERAMIC ▪ DISC ▪ CAPACITOR CLASS I TEMPERATURE COMPENSATION TYPE FEATURES： ■ Capacitance has linear temperature coefficient ■ Capacitance high stability ■ Low lost at wide range of frequency GENERAL SPECIFICATION Capacitance Range 1pF to 820pF Capacitance Tolerance ±0.25pF, ±0.5pF, ±5%, ±10% Operating Temperature Range -25℃ ~ 85℃ Rated Working Voltage Rating 50, 500 VDC Q Factor @ 1MHz, 1±0.2Vrms, 25℃ C≧30 pF...........Q≧1,000, Insulation Resistance (IR) @ 25℃ 10,000 MΩ Minimum Dielectric Strength 3 times the rated WVDC Testing Parameters 1MHz ±20%, 1.0Vrms±0.2Vrms C＜30 pF…......Q≧400+20*C CAPACITANCE CHART： Temp. Part Rated Char. Dia. Voltage CH 0±60 ppm/ ℃ 5 6 7 8 10 12 5 6 8 10 U (50V) C (500V) Capacitance Range (pF) 0.5 - 47 51 - 75 82 - 100 120 - 150 180 - 270 300 - 390 0.5 - 36 39 - 56 68 - 100 120 - 150 Dim.(mm) Max. Tol. C, D (≤ 10pF) J, K (>=10pF) D T F 5.5 6.5 7.5 3.5 8.5 10.5 5.00 12.5 5.5 6.5 4.0 8.5 10.5 Temp. Char. SL + 350 -1200 ppm/℃ Part Rated Dia. Voltage 5 6 7 8 10 5 6 8 10 U (50V) C (500V) Capacitance Range (pF) 10 - 120 150 - 220 240 - 330 360 - 470 500 - 820 10 - 82 100 - 150 180 - 220 240 - 390 Dim.(mm) Max. Tol. D T F 5.5 6.5 7.5 3.5 8.5 J, K 10.5 5.00 5.5 6.5 4.0 8.5 10.5 ● When Ordering, please use the Pan Overseas part number as indicated on page no. 13. 14 Pan Overseas CERAMIC ▪ DISC ▪ CAPACITOR TAPING SPECIFICATION AND DIMENSION Item Symbol Body diameter Body thickness Lead-wire diameter Pitch of component Feed hole pitch Feed hole center to lead Hole center to component center Lead-to lead distance Component alignment, F-R. Tape width Hold-down tape width Hole position Hold-down tape position Height of component form tape center Component height Lead-wire protrusion Feed hole diameter Total tape thickness Length of snipped lead Coating rundown on leads D T d P P0 P1 P2 F △h W W0 W1 W2 For Straight Lead Type For Kinked Lead Type H Specification Remarks Value Tolerance 11.0 Max 3.5 Max 0.6 +0.06-0.05 12.7 ±1.0 Cumulative pitch error： 1.0 mm/20 pitch 12.7 ±0.3 3.85 To be measured at bottom of clinch ±0.7 6.35 ±1.3 5.0 +0.8 -0.2 0 ±2.0 18.0 +1.0 -0.5 11.0 Min 9.0 +0.75 -0.5 3.0 Max 20.0 +1.0 -0.5 H0 16.0 ±0.5 H1 l D0 t L C 32.25 2.0 4.0 0.7 11.0 1.5 Max Max ±0.3 ±0.2 Max Max Ground paper： 0.5±0.1 mm These radial taped ceramic disc capacitors are designed especially for automatic insertion, and is only available For those parts have diameter of 11.0mm or smaller. 19