ALUMINUM ELECTROLYTIC CAPACITORS Trimmed (Cut) or Formed Leads Please refer to page26 about the FPCAP product spec. Radial lead type In order to identify correct part number for the processed lead product, cut/formed lead code must be added to bulk part number. If the bulk part number is up to 11th digit, 12 13 14 In case 12th digit is alphabet, it shall be: 12 13 14 15 16 processed lead coding shall be as follows: 1 code code In case 12th digit is numeral, it shall be: 12 13 14 code r — 5 5 5.0 6.3 — 8 — 8 — 3 1.0 — 4 1.5 — 5 2.0 — 6.3 2.5 — 8 3.5 — 5.0 5 12.5 — 16 7.5 18 — 20 — 10 22 25 — C P C C All length Same as above. 4.5 — All length Same as above. 4.0 — C V C T All length Same as above. 3.5 — All length Same as above. 3.2 — Same as above. 3.0 — C M All length 5mmL,7mmL A E Other length A A 4 5 5 4.5 6.3 1.1 8 1.3 φd 18, 20, 22, 25) 10 Snap-in 10 5.0 22 25 1.3 P±0.5 L±0.5 1.8 12.5 Conductive polymer aluminum solid electrolytic capacitors :Cutting configurations only End seal Configuration (φ 10, 12.5, 16, L±0.5 φd 20 (φ 4, 5, 6.3, 8) (Code A E ) 1.5 MAX. (Code A A ) 2.5 MAX. F±0.5 φ 8 × 5 = F: 2.5 Please contact us for the φ 16 to φ 25 × 12.5L products. φd All length A A 5 12.5 4.5 16 7.5 18 — r 12.5 — r L±0.5 — F±0.5 10 Cutting P±0.5 — C A All length F±0.5 — 5 3.5 6.3 L±0.5 — Other length F V B A , B B ) 1.5MAX. F A , F V ) 2.5MAX. F±0.5 (Code (Code — φd 4 5 Lead configurations φD Other length F A Forming and cutting 5mmL,7mmL B B φD F L 4 φD B A 5mmL,7mmL (mm) Dimensions (mm) φD Cut / Formed lead code Code Case length φD Configurations ∗Lead diameter (φd) and lead pitch (P) are subject to capacitor specifications. Please contact us about the FPCAP. Configuration φ 3 5 6.3 4 8 10 12.5 16 18 Exception : φ5, φ6.3 case size of MA, MR, MF, MP, MT, MW, SA, SF, SP, SR, ST, SW, PW (7mmL), TT (7mmL) series : configration Exception : φ6.3 × 6mmL, φ6.3 × 9mmL, φ8 × 7mmL, φ8 × 9mmL, φ10 × 8mmL, φ10 × 10mmL size of LF LE , LG , LS , LV , LX 9 will be put at 12th digit of type numbering system of CS, PZ series: configration 2 Exception : Conductive polymer aluminum solid electrolytic capacitors 20 22 25 1 series, MV, SV, PV series CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS Please refer to page26 about the FPCAP product spec. Taped Leads for Automatic Insertion Systems Radial lead type (Applicable standard JIS C0806-2) In order to identify correct part number for the taped product, taping code must be added. (mm) Specifications + – Packaging Lead style Leader If the bulk part number is up to 11th digit, taping code shall be as follows: 12 13 14 Formed lead 1 code In case 12th digit is numeral, it shall be Ammo-pack 12 13 14 In case 12th digit is alphabet, it shall be F P0 See Table 1 12.7 3 to 8 See Table 2 12.7 4 to 10 Straight lead code Capacitor diameter (φ) See Table 2 See Table 2 15.0 15.0 12.5 16, 18 Taping code Code Applicable size T E φ 4 to 8 Case length (5mmL, 7mmL) T P (φ 3 × 5, φ 4 × 11) T A (φ 5×9 to φ 8×9, φ 4×11 to φ 8×20) T P T P T D TO TN φ 4 to 8 Case length (5mmL), φ6.3×6 φ 4 to 6.3 Case length (7mmL), φ 4 φ 5×9 or more, φ 6.3×9 or more, φ 8×7 or more, φ 10×8 to 25) (φ 12.5×12.5 to 25) (φ16 ×15 to 25, φ18 ×15 to 25) Notes: Conductive polymer aluminum solid electrolytic capacitors 12 13 14 15 16 code Table 1 (Formed lead type) P2 (mm) Formed Lead Type Case Size Case dia (φ ) × Length (L) φ 4 × 11 φ 6.3 × 9 φ4 × 5 φ5 × 5 φ6.3 × 5 φ8 × 5 φ5 × 9 φ 6.3 × 11 Tolerance φ 3 × 5 φ 4 × 11 φ 5 × 11 φ 6.3 × 15 i ng φ4 × 7 φ5 × 7 φ 6.3 × 7 φ8 × 7 φ 5 × 15 C od Item e TP TP TE TA P Ta p P1 w w0 H H0 F Lead-wire diameter ± 0.05 P Pitch of component ±1.0 12.7 12.7 12.7 12.7 12.7 P0 Feed hole pitch ±0.2 12.7 12.7 12.7 12.7 12.7 P1 Hole center to lead ± 0.5 5.1 5.1 3.85 3.85 ± 1.0 6.35 6.35 6.35 6.35 6.35 2.5 2.5 5.0 5.0 5.0 φd P0 18.5 17.5 18.5 20.0 16.0 16.0 16.0 16.0 Lead-to-lead +0.8 F distance –0.2 D0 t 0.45 0.45 (φ 8 × 7 : 0.5) 0.5 (φ 4 × 11 : 0.45) P2 of component HHeight from tape center ± 0.75 18.5 clinch H0Lead-wire height ± 0.5 16.0 W ± 0.5 18.0 18.0 18.0 18.0 18.0 down tape W0Holdwidth MIN. 7.0 7.0 7.0 7.0 7.0 φ D0 Feed hole diameter ± 0.2 4.0 4.0 4.0 4.0 4.0 t ±0.2 0.6 0.6 0.6 0.6 0.6 Tape Width Total tape thickness P 3 (mm) Case Size Straight Lead Type Tolerance Ta p ing Item C F w F w0 H φ4, 5 P1 φd D0 t od e Case dia (φ ) × Length (L) φ4 × 5 φ 5 φ 6.3 φ 8 × 5 φ 8 × 7 φ 8 φ 10 φ 12.5 φ4 × 7 TP TP, TD TP, TD 0.45 0.45 0.45 0.5, 0.6 0.5, 0.6 TP TD TD TD TO TN 0.45 0.5 0.6 0.6 0.6 0.8 Lead-wire diameter P Pitch of component ±1.0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.0 30.0 P0 Feed hole pitch ±0.2 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.0 15.0 P1 Hole center to lead ± 0.5 ( 1 5.35) ( 1 5.35) 3.75 ± 0.05 φ 16 φ 18 φ d P0 0.6 3.85 Table 2 (Straight lead type) TA φ d hole center P2Feed to component center 0.40 φ8 × 9 φ 8 × 11.5 φ 8 × 15 φ 8 × 20 hole center P2Feed ± 1.0 to component center Lead-to-lead +0.8 F distance –0.2 5.1 5.1 5.1 5.1 4.6 4.6 3.85 5.0 6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.5 2.5 1 2.5 1 2.5 2.5 3.5 3.5 5.0 5.0 7.5 7.5 2 of component HHeight from tape center ±0.75 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 W ±0.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 down tape W0Holdwidth Tape Width MIN. 7.0 7.0 7.0 7.0 7.0 7.0 7.0 12.5 12.5 φ D0 Feed hole diameter ± 0.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 t ±0.2 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 Total tape thickness Special taping specifications on H. F. and K. dimensions other than the above figures are available upon request. Conductive polymer aluminum solid electrolytic capacitors : Straigh lead type only Only the above mentioned dimensions are specified. Notes: 1 F = 2.0mm is also available, provided Taping code to be T C . 2 Tolerance on F for φ16 and φ18 units shall be ± 0.8mm. 3 Tolerance on Ho for φ3 units shall be 16.0 MIN. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS (mm) Packaging Ammo-pack (Flat box type) L W + + H - L 340 340 H 150 200 W 50 50 340 250 50 340 300 50 340 260 54 340 340 340 340 340 200 300 260 200 200 54 54 62 62 65 330 290 65 320 Axial lead type (Applicable standard JIS C0805) The following code shall be put at 12th to 14th digit of the corresponding type number of capacitors. 10 63.5 10 73.0 10 52.4 15 63.5 15 73.0 15 5 6.3 8 5 6.3 8 5 6.3 8 10 13 (except 31.5L) 10 13 10 13 500 250 250 (mm) Taping code Q'ty / Reel (pcs.) 1LS 1LV 1LY 1LT 1LW 1LZ Please contact us for complete information on the package dimensions for tapes axial lead capacitors. 1,600 1,300 1,000 1,600 1,300 1,000 1,600 1,300 1,000 500 350 500 350 500 350 + White tape for positive polarity w±1.5 52.4 Case dia (φ) 2 MAX. Dim. P (Component Pitch) Q'ty / Box 2,000 2,000 2,000 1,000 2,000 2,000 1,000 500 2,000 1,000 500 500 D w±1.2 2 Dim. W (Tape distance) 65 6±1 Taping Specifications 230 Case Size (φ D × L) 3×5 4 × 5, 4 × 7 5 × 5, 5 × 7 8 × 5, 8 × 7, 8 × 8 6.3 × 5, 6.3 × 6, 6.3 × 7 4 × 11, 5 × 9, 5 × 11, 5 × 15 8 × 9, 8 × 10, 8 × 11.5, 8 × 12, 8 × 15 10 × 8, 10 × 9, 10 × 10, 10 × 12.5, 10 × 13, 10 × 15, 10 × 16 6.3 × 9, 6.3 × 10.5, 6.3 × 11, 6.3 × 15 8 × 20 10 × 20 10 × 25 12.5 × 12.5, 12.5 × 15, 12.5 × 20 12.5 × 25 18 × 15, 18 × 20, 18 × 25 16 × 15, 16 × 20, 16 × 25 — P±0.5 Blue or yellow tape for negative polarity 1.2 MAX. CAT.8100D CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS NS, R7, R5, L8, E5, S8, F8, NU, NE, S6, HT series Packing Quantity (Bulk) Long Lead Case Size Quantity vinyl bag (PCS) Cut Lead Minimum quantity (PCS / Carton Box) Quantity vinyl bag (PCS) Minimum quantity (PCS / Carton Box) Please note the order quantity must be in multiples of the minimum quantity. Cut Lead (Bulk) Dimensions Lead Forming (Symbol:CG) Nichicon P/N FPCAP P/N [Unit : mm] Item Lead Forming Symbol Lead Wire Diameter Lead Wire Length Lead Wire Interval Note : Please inquire for FPCAP by Packing Unit as above. NS, R7, R5, L8, E5, S8, F8, NU, NE, S6, HT series Packing Quantity(Ammo Pack) Size (dia) Minimum quantity (pcs / Ammo Pack) Ammo pack Polarity mark [Unit : mm] The lid of feeding side of the taping box shall be torn off at the perforation line. CAT.8100D CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS Taping Dimensions Lead Forming ( Symbol:Ex. PX ) Nichicon P/N Symbol FPCAP P/N Symbol 2.5mm pitch taping Taping Dimensions for Nichicon P/N Symbol FPCAP P/N Symbol φ 5.0mm pitch taping Taping Dimensions for Nichicon P/N Symbol FPCAP P/N Symbol φ Specification Table 2.5mm pitch taping Taping Dimensions for Nichicon P/N Symbol FPCAP P/N Symbol to to φ 3.5mm or 5.0mm Taping Dimensions for pitch taping Nichicon P/N Symbol FPCAP P/N Symbol φ [Unit : mm] Item Lead Forming Symbol (Nichicon P/N) Lead Forming Symbol (FPCAP P/N) Lead Wire Diameter Tolerance Lead Wire Interval Pitch Between Components Feed Holes Position Gap Feed Holes Position Gap Lead Wire Clinch Height Components Height Base Tape Feed Holes Position Gap Feed Holes Diameter Components Alignment Tape Thickness CAT.8100D