LT9C13-89-URC2 5.0MM ROUND LAMP Absolute Maximum Ratings at TA=25℃ ℃ Features * LOW CURRENT REQUIREMENTS μ A)………..…………………….…………………………………………. 4.0V REVERSE VOLTAGE (<100μ * HIGH LIGHT OUTPUT D.C. FORWARD CURRENT………………….………………………………………………..………… 30mA * RELIABLE AND RUGGED PULSE CURRENT (1/10 DUTY CYCLE,0.1 ms PULSE WIDTH)………………….…..……..….. 100 mA * IC COMPATIBLE ℃ TO + 85℃ ℃ OPERATING TEMPERATURE RANGE………………………………..…………….… -25℃ ℃ TO +100℃ ℃ STORAGE TEMPERATURE RANGE…………………………………………………. -25℃ ℃ FOR 5 SEC. LEAD SOLDERING TEMP. (1.6mm FROM BODY)……………………..…… 260℃ Electrical/optical characteristics at TA=25℃ ℃ LED PART NUMBER LT9C13-89-URC2 (1) LENS CHIP LENS WAVELENGTH TYP. IF @20mA (nm) MATERIAL EMITTING COLOR COLOR AlGaInP SUPER RED W.C. COLOR W.C….WATER CLEAR FORWARD VOLTAGE @20mA(V) LUMINOUS INTENSITY @20mA(mcd) λp λd TYP. MAX. MIN. TYP. 639± ±5 630± ±5 2.1 2.4 1100 1900 VIEW ANGLE 2θ θ 1/2 (deg) 15 (2) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. (3) ALL ABOVE COMPONENTS ARE CONSIDERED . DEVIATIONS FROM STATED SPECIFICATIONS WILL REQUIRE A NEW PART NUMBER BE ASSIGNED . Package Dimensions Radiation Pattern 1. ALL DIMENSIONS ARE IN mm,TOLERANCE IS± ± 0.25mm UNLESS OTHERWISE NOTED. 2. AN EPOXY MENISCUS MAY EXTEND ABOUT 1.0mm DOWN THE LEADS. 3. BURR AROUND BOTTOM OF EPOXY BODY MAY BE 0.5mm MAX. First Edition 2001/7/25 1/2 LT9C13-89-URC2 5.0MM ROUND LAMP Forward Current vs. Applied Voltage Luminous Intensity vs. Forward Current Forward Current vs. Ambient Temperature Relative Intensity vs. Wavelength 2/2