marlow industries inc.® Thermoelectric Cooler SP5162 Performance Values Hot Side Temperature (°C) 27°C 85°C 68 88.5 Qmax (watts): 2.30 2.80 Imax (amps): 1.60 1.50 Vmax (vdc): 2.17 2.74 AC Resistance (ohms): 1.14 --- ΔTmax (°C-dry N2): Mechanical Characteristics Ceramic material: Alumina (AC) Ordering Options SP5162-01AC hot side exterior is metallized SP5162-04AC both surfaces are metallized with 183°C For information regarding additional ordering options available, please contact a Marlow engineering representative. Copyright 2002, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0224, Rev 2 Thermoelectric Cooler SP5162 Performance Curves Environment: One atmosphere dry nitrogen For performance information in a vacuum or with hot side temperatures other than 27°C or 85°C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 TEL: 214-340-4900 FAX: 214-341-5212 Internet: http://www.marlow.com Marlow Industries Europe Aberdeen House, South Road Haywards Heath West Sussex RH164NG UK TEL: +44 (0)1444-443404 FAX: +44 (0)1444-443334 Marlow Industries Asia 1-1-8-401 Uehara, Shibuya-ku Tokyo, Japan 151-0064 TEL: +81 (3) 5454-5280 FAX: +81 (3) 5454-5281 Copyright 2002, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0224, Rev 2