marlow industries inc.® Thermoelectric Cooler MI2063T Performance Values Hot Side Temperature (°C) 27°C 50°C 80 91 Qmax (watts): 13.4 14.9 Imax (amps): 4.6 4.6 Vmax (vdc): 8.2 9.2 AC Resistance (ohms): 1.65 --- ∆ Tmax (°C-dry N2): Mechanical Characteristics Positive Lead 1.167 [29.64] Leads: 22 AWG (0.64) Bus Solid Tinned Copper .770 [19.56] Negative Lead .770 [19.56] 2.00 +/-.25 [50.80+/-6.35] 1.167 [29.64] .234+/-.013 [5.94+/-0.33] Cold Side .005 [0.13] A .003 [0.08] .003 [0.08] A Ceramic Material: Combination of Alumina and Beryllia (AB) Millimeters are in [ ] Ordering Options • MI2063T-01AB both surfaces are metallized • MI2063T-02AB hot side exterior is metallized • MI2063T-03AB no metallization • For example, an MI2063T with only the hot side metallized is specified as an MI2063T-02AB Pretinned metallized ceramic surface(s) with 96°C or 117°C solder. Thermistor mounted on edge of cold side ceramic. (Calibration available.) Elevated temperature burn-in with test data provided. 102-0047, Rev D Thermoelectric Cooler MI2063T Performance Curves Environment: One atmosphere dry nitrogen Hot Side Temperature: 27°C 2.00 4.00 6.00 8.00 10.0 60.0 40.0 20.0 6.00 40.0 8.00 20.0 10.0 12.0 0.0 14.0 10.0 6.0 4.0 Q=0 T=0 2.0 1.0 2.0 3.0 4.0 5.0 6.0 VOLTAGE (VDC) VOLTAGE (VDC) 2.00 4.00 60.0 8.0 0.0 0.0 0.00 80.0 12.0 0.0 HEAT LOAD (WATTS) 100.0 T (C) HEAT LOAD (WATTS) 0.00 80.0 T (C) Hot Side Temperature: 50°C 8.0 6.0 4.0 Q=0 T=0 2.0 0.0 0.0 CURRENT (AMPS) 1.0 2.0 3.0 4.0 5.0 6.0 CURRENT (AMPS) For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 TEL: 214-340-4900 FAX: 214-341-5212 Internet: http://www.marlow.com Marlow Industries Europe Aberdeen House, South Road Haywards Heath West Sussex RH164NG UK TEL: +44 (0)1444-443404 FAX: +44 (0)1444-443334 Marlow Industries Asia 1-1-8-401 Uehara, Shibuya-ku Tokyo, Japan 151-0064 TEL: +81 (3) 5454-5280 FAX: +81 (3) 5454-5281 Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0047, Rev D