TCD MULTIL AYER CERAMIC TCD Series Y5U Ceramic Radial Lead High CV 125C Maximum Temperature Actual Size The TCD series are radial lead ceramic capacitors from UCC/NCC. These capacitors have a very low ESR and impedance which makes these capacitors ideal for filtering switching power supplies and DC-DC converters. The TCD series has a maximum 250VDC rated voltage making them more applicable for use in higher voltage power supplies than our ceramic chip capacitors. All of our radial capacitors with 5mm lead spacing are also available with ammo pack taping. Refer to Mini-Glossary at the end of the multilayer ceramic capacitors section for additional technical information and specifications. Summary of Specifications Radial lead terminals. Capacitance range: 0.1 to 100µF. Voltage range: 25 to 250VDC. Operating temperature range: 55C to 125C. Standard capacitance tolerance: 20% or 20% to 80% Nominal case size (LWH): 5.03.56.0mm to 28.58.520.0mm. Rated lifetime: 1,000 hours at 125C. 18 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com TCD Series TCD Specifications Item Characteristics Rated Voltage Range 25 to 250VDC Capacitance Range 0.1 to 100F Capacitance Tolerance 20% ( M ) or 20% to 80% ( Z ) at 202C, 10.1kHz, and 10.2Vrms Dissipation Factor ( Tan ) 2.5% maximum at 202C, 10.1kHz, and 10.2Vrms Ripple Current At 125C, the maximum ripple current at 10kHz -1MHz is specified in the Ratings Tables. Withstand Voltage No abnormality after applying 250% of the DC rated voltage from terminal-to-terminal and terminal-to-resin coating for 1 to 5 seconds at 202C. Insulation Resistance 1,000 Ω•F or 10,000MΩ, whichever is less, after applying the DC rated voltage for 605 seconds at 202C. Solderability Using H60A or H63A solder at a solder temperature of 2355C and a dip time of 20.5 seconds, a minimum of 75% of the circumferential surface of the dipped lead wires shall be covered with new solder. Soldering Heat Resistance Using H60A or H63A solder at a solder temperature of 35010C and a dip time of 30.5 seconds at a depth of 2 to 2.5mm from the resin coating, the following specifications shall be satisfied when the capacitors are restored to 20C. Appearance : no abnormality Capacitance change : ≤ 15% of initial measured value Tan ( DF ) : ≤ 2.5% The following specifications shall be satisfied when the capacitors are restored to 20C after applying the DC rated voltage for 50024,0 hours at 402C, 90 - 95% RH. After the initial load test, the withstand voltage shall be tested by applying 250% of the DC rated voltage for 5 seconds. Humidity Load Life Test Appearance : no abnormality Capacitance change : ≤ 20% of initial measured value Tan ( DF ) : ≤ 5% Insulation resistance : 50 Ω•F or 1,000MΩ, whichever is less The following specifications shall be satisfied when the capacitors are restored to 20C after applying 200% of the DC rated voltage for 1,00048,0 hours at 852C, or 1,00048,0 hours at 1253C with the initial DC rated voltage applied. After the initial load test, the withstand voltage shall be tested by applying 250% of the DC rated voltage for 5 seconds. Load Life Test Appearance : no abnormality Capacitance change : ≤ 20% of initial measured value Tan ( DF ) : ≤ 5% Insulation resistance : 100 Ω•F or 1,000MΩ, whichever is less Part Numbering System for TCD Series TCD 31 E 1H 225 M When ordering, always specify complete catalog number for TCD Series. T Taping Code: T = Straight Lead; T710 = Crimped Lead. Optional taping is available for case codes 21, 30, 31 and 41 only. Capacitance Tolerance: M = 20%; Z = 20% to 80% Capacitance Value: Expressed in picofarads. The first two digits are significant figures, and the third digit indicates the number of zeros following these figures (e.g. 225 = 2,200,000pF = 2.2F ). Voltage Code: 1E = 25VDC; 1H = 50VDC; 2A = 100VDC; 2E = 250VDC. Temperature Coefficient: E = Y5U. Case Code: Refer to dimensions section for standard case sizes. Series Name: Indicates basic capacitor design. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 19 TCD 55 to 125C MULTIL AYER CERAMIC Operating Temperature Range TCD Series Construction and Diagram of Dimensions Unit: mm Radial Lead Multilayer Ceramic Ceramic Dielectric Resin Coating Termination W L Solder Internal Electrode MULTIL AYER CERAMIC TCD H Lead Wire P Case Dimensions 15 Min. F d UCC Case Code L max. W max. H max. P max. F 0.8 Ød 0.05 21 30 31 41 51 60 61 5.0 6.3 7.5 3.5 4.0 4.0 5.0 5.5 8.5 8.5 4.5 5.0 7.5 1.5 1.5 1.5 1.5 1.5 2.5 2.5 5.0 5.0 5.0 5.0 10.0 20.0 25.0 0.5 0.5 0.5 0.5 0.6 0.8 0.8 10.0 13.5 22.5 28.5 10.0 13.5 17.5 17.5 Standard Voltage Ratings - Radial Lead Multilayer Ceramic Rated Voltage (WVDC) Capacitance (µF ) Catalog †Part Number † UCC Case Code* Maximum Ripple Current (A rms) at 125C, 10kHz-1MHz 25 Volts 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 TCD21E1E684M TCD21E1E105M TCD30E1E155M TCD30E1E225M TCD31E1E335M TCD31E1E475M TCD41E1E685M TCD41E1E106M TCD51E1E156M TCD51E1E226M TCD60E1E336M TCD60E1E476M TCD61E1E686M TCD61E1E107M 21 21 30 30 31 31 41 41 51 51 60 60 61 61 0.3 0.3 0.8 0.8 1.0 1.0 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 50 Volts 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 TCD21E1H104M TCD21E1H154M TCD21E1H224M TCD21E1H334M TCD21E1H474M TCD30E1H684M TCD30E1H105M TCD31E1H155M TCD31E1H225M TCD31E1H335M TCD41E1H475M TCD41E1H685M TCD51E1H106M TCD51E1H156M TCD60E1H226M 21 21 21 21 21 30 30 31 31 31 41 41 51 51 60 0.11 0.16 0.24 0.3 0.3 0.75 0.8 1.0 1.0 1.0 1.5 1.5 2.0 2.0 3.0 † M indicates 20% tolerance. Substitute code letter Z in part number for 20%,80% tolerance. * Refer to diagram of dimensions for actual case sizes. 20 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com TCD Series Standard Voltage Ratings - Radial Lead Multilayer Ceramic Maximum Ripple Current (A rms) at 125C, 10kHz-1MHz 33 47 68 TCD60E1H336M TCD61E1H476M TCD61E1H686M 60 61 61 3.0 4.0 4.0 100 Volts 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 TCD21E2A104M TCD21E2A154M TCD21E2A224M TCD30E2A334M TCD30E2A474M TCD31E2A684M TCD31E2A105M TCD31E2A155M TCD41E2A225M TCD41E2A335M TCD51E2A475M TCD51E2A685M TCD60E2A106M TCD60E2A156M TCD61E2A226M TCD61E2A336M 21 21 21 30 30 31 31 31 41 41 51 51 60 60 61 61 0.22 0.3 0.3 0.73 0.8 1.0 1.0 1.0 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 250 Volts 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 TCD30E2E104M TCD30E2E154M TCD31E2E224M TCD31E2E334M TCD41E2E474M TCD41E2E684M TCD51E2E105M TCD51E2E155M TCD60E2E225M TCD60E2E335M TCD61E2E475M TCD61E2E685M 30 30 31 31 41 41 51 51 60 60 61 61 0.55 0.8 1.0 1.0 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 50 Volts † M indicates 20% tolerance. Substitute code letter Z in part number for 20%,80% tolerance. * Refer to diagram of dimensions for actual case sizes. Ammo Pack Taping Specifications Radial Lead Multilayer Ceramics Unit: mm Available for Case Codes 21, 30, 31 and 41 Conforms to JIS-C-0805 Ammo Pack Dimensions and Quantity Per Box h P0 / 2 P H (straight) UCC Case Code 21 30 31 41 H max. Straight Lead H max. Crimped Lead H 00.5 23 25 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 24 26 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 26 28 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 29 30 16.0 12.7 12.7 3.85 6.35 5.0 18.0 9.0 13.0 1.5 4.0 0.5 0.6 0 2,000 2,000 2,000 1,500 P1.0 P 00.3 P10.7 P 0 /21.3 H (crimped) M0 F1.0 W0.5,1.0 W/20.5 H0 W/ 2 M W M1.0 M 01.5 Ø D0.2 P1 F P0 t Ød ØD Ø d0.05 t0.2 ∆h2 Pieces Per Box * *Specified quantity may vary for rating of capacitor. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 21 TCD UCC Case Code* Capacitance (µF ) MULTIL AYER CERAMIC Catalog †Part Number † Rated Voltage (WVDC) TCD Series Capacitance and DF Variation with Temperature and Applied DC Voltage TCD 25V, 10µF TCD 100V, 1µF Cap Bias 0V Cap Bias 50V Cap Bias 100V DF Bias 0V 20 0 20 60 20 80 10 40 20 0 20 40 60 80 100 120 20 0 20 40 60 20 80 10 100 60 0 140 40 20 0 Temperature (C) Cap Bias 0V Cap Bias 125V Cap Bias 250V DF Bias 0V Capacitance Change (%) 40 20 0 20 60 20 80 10 0 20 40 60 Temperature (C) 22 80 100 120 0 140 DF (%) 40 20 60 80 100 120 0 140 TCD 250V, 1.5µF Cap Bias 0V Cap Bias 25V Cap Bias 50V 40 40 Temperature (C) TCD 50V, 1.5µF 100 60 20 DF Bias 0V 40 20 0 20 40 60 20 80 10 100 60 40 20 0 20 40 60 80 100 120 Temperature (C) United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 0 140 DF (%) 100 60 DF (%) 40 DF Bias 0V 40 DF (%) Capacitance Change (%) Capacitance Change (%) 40 Capacitance Change (%) TCD MULTIL AYER CERAMIC Cap Bias 0V Cap Bias 12V Cap Bias 25V TCD Series Impedance/ESR – Frequency Characteristics Z TCD61E1H685M ESR 100 Impedance / ESR (ohms) Impedance / ESR (ohms) Z TCD41E1H685M ESR 10 1 100 10 1 0.01 0.01 0.001 0.001 100 1k 10k 100k 1M 10M 100 1k Frequency (Hz) 1M 10M 1M 10M 1M 10M Z TCD61E2A336M ESR 100 Impedance / ESR (ohms) Impedance / ESR (ohms) 100k Frequency (Hz) Z TCD41E2A335M ESR 10 1 100 10 1 0.1 0.1 0.01 0.01 0.001 0.001 100 1k 10k 100k 1M 10M 100 1k Frequency (Hz) 10k 100k Frequency (Hz) Z TCD41E2E684M ESR Z TCD61E2E685M ESR 100 Impedance / ESR (ohms) Impedance / ESR (ohms) 10k 10 1 100 10 1 0.1 0.1 0.01 0.01 0.001 0.001 100 1k 10k 100k Frequency (Hz) 1M 10M 100 1k 10k 100k Frequency (Hz) United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 23 TCD 0.1 MULTIL AYER CERAMIC 0.1