ILLUMINATED SWITCHES TP 5100: UNI AND TRI-COLOUR ILLUMINATED SWITCH FEATURES • • • • • 17.6mm square keytop, momentary action Full surface illumination with dimple buttons Choice of single colour (red, green, yellow) LED illumination Optional programmable tri-colour LED illumination PCB mounting (2.5mm pitch) and panel mount options DESCRIPTION The TP 5100 series is a range of very high performance LED illuminated pushbutton key switches, designed and constructed for medium current PCB mounting applications. The switch consists of an LED built into the keycap unit and a switch body using gold over silver-clad electrical contacts. SPECIFICATIONS Electrical Rating Contact Resistance Insulation Resistance Dielectric Strength 12V DC 100mA 100mΩ max 100MΩ min @ 100V DC 250V AC for 1 minute Mechanical Operating Life Operating Temp Operating Force 1 million operations -10˚C to +50˚C 2.0N +/- 0.1N Electrical Performance – LED VR (Peak Reverse Voltage) 12 VDC IFM (Max Forward Current) 50mA max VF (Forward Voltage) Red = 3.9 VDC Green = 4.2 VDC Yellow = 4.0 VDC IF (Rec Operating Current) 30mA ORDERING INFORMATION TP 100 M 5 Series Code LED Colour Lens Dimensions 5 17.6mm Telephone 01256 467367 Mounting 100 PCB Mounting email [email protected] R Y G M Red Yellow Green Tri-Colour Website www.devlincomponents.co.uk ILLUMINATED SWITCHES TP 5100: UNI AND TRI-COLOUR ILLUMINATED SWITCH DIMENSIONS PCB Layout Circuit Diagrams All measurements are in mm. Tolerance +/- 0.3mm unless shown. This leaflet is believed to contain the best information at time of printing, but is subject to change without notice. Devlin Electronics Limited ,Unit D1, Grafton Way, Basingstoke, Hants, RG22 6HZ, England Telephone 01256 467367 email [email protected] Website www.devlincomponents.co.uk