MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com P4KE SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 550 Volts 400 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in DO-41 package • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Low incremental surge resistance • Excellent clamping capability • Fast response time: typically less than 1.0 ps from 0 volts to BV min • Typical IR less than 1µA above 10V • High temperature soldering guaranteed: 300°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-41 Molded plastic Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.012 ounces, 0.3 grams DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types P4KE6.80 thru types P4KE550 (e.g. P4KE6.8C, P4KE550CA) Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For Capacitive load, derate current by 20% RATING Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms (NOTE 1) Peak Pulse Current of on 10/1000 µs waveform (Note 1) Steady State Power Dissipation at TL = 75°C Lead lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load, (JEDEC Method)(Note 3) Operatings and Storage Temperature Range SYMBOL VALUE UNITS PPPM Minimum 400 Watts IPPM SEE TABLE 1 Amps PM(AV) 1.0 Watts IFSM 40 Amps TJ, TSTG -55 +175 °C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2. Mounted on Copper Pad area of 1.6x1.6" (40x40mm) per Fig.5. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com Fig.2 - Pulse Derating Curve Fig. 1 - Peak Pulse Power Rating 100 100 Non-repetitive Pulse Waveform shown in Fig. 3 Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage,% PPPM-Peak Pulse Power (kW) RATING AND CHARACTERISTIC CURVES P4KE SERIES 10 1 75 50 25 0 0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms CJ - Junction Capacitance IPPM - Peak Pulse Current, % IRSM Pulse Width(td)is defined as the point where the peak current decays to 50% of I 10/1000µsec.Waveform as defined by R.E.A. 50 1000 Measured at Zero Bias 100 Measured at Stand-Off Voltage, VWM 10 3.0 t - Time(ms) 1.0 0 2.0 3. 4.0 10 1.0 4.0 VWM 0.75 0.63 0.50 1.6x1.6x.040" (40x40x1mm) Copper Heat Sinks 0.38 0.25 TJ = TJ max. 8.3ms Single Half Sine-Wave (JEDEC Method) 100 50 10 0.13 5 1 T50L - Lead 25 75 Temperature 100 125 (°C) 150 175 200 Fig.7 - Typical Reverse Leakage Characteristics 0 Measured at Devices Stand-off Voltage,V WM TA = 25°C 10 1 0.1 0.01 0 50 100 150 200 250 300 350 V(BR) - Breakdown Voltage 400 450 500 100 100 Transient Thermal Impedance (°C/W) 100 50 10 Number of Cycles at 60 Hz Fig. 8 - Typ.Transient Thermal Impedance 0.00 ID - Instantaneous Reverse Leakage Current (µA) 200 200 60 HZ Resistive or Inductive Load IFSM - Peak Forward Surge Current (A) PM(AV ),Steady State Power Dissipation (W) 1.00 L=0.375" (9.5mm) Lead Lengths 100 - Reverse Stand-Off Voltage (V) Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Fig.5 - steady State Power Derating Curve 0.88 1.2 TJ = 25°C f = 1.0MHZ Vsig = 50mVp-p 1000 td 0 1 10000 TJ = 25°C Half Value- IPPM 2 0.8 Fig.4 - Typ.Junction Capacitance Uni-Directional Fig.3 - Pulse Waveform 100 0.6 TA - Ambient Temperature (°C) 150 Peak Value IPPM 0.4 10ms td - Pulse Width (sec.) tr = 10µsec. 0.2 10 1 0.001 0.01 0.1 1 10 tp-Pulse Duration (sec) 100 1000 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com 400 Watt TVS UNI-POLAR BI-POLAR REVERSE BREAKDOWN BREAKDOWN MAXIMUM TEST VOLTAGE VOLTAGE STANDOFF CLAMPING CURRENT VBR (V) VBR (V) VOLTAGE VOLTAGE mA (IT) VRWM (V) @IPP VC (V) MIN. @ IT MAX. @ IT 5.80 6.45 7.14 P4KE6.8A P4KE6.8CA 6.40 7.13 7.88 P4KE7.5A P4KE7.5CA 7.02 7.79 8.61 P4KE8.2A P4KE8.2CA 7.78 8.65 9.55 P4KE9.1A P4KE9.1CA 8.55 9.50 10.50 P4KE10A P4KE10CA 9.40 10.50 11.60 P4KE11A P4KE11CA 10.20 11.40 12.60 P4KE12A P4KE12CA 11.10 12.40 13.70 P4KE13A P4KE13CA 10.00 14.30 15.80 P4KE15A P4KE15CA 12.90 15.20 16.80 P4KE16A P4KE16CA 14.50 17.10 18.90 P4KE18A P4KE18CA 17.10 19.00 21.00 P4KE20A P4KE20CA 18.80 20.90 23.10 P4KE22A P4KE22CA 20.50 22.80 25.20 P4KE24A P4KE24CA 23.10 25.70 28.40 P4KE27A P4KE27CA 25.60 28.50 31.50 P4KE30A P4KE30CA 28.20 31.40 34.70 P4KE33A P4KE33CA 30.80 34.20 37.80 P4KE36A P4KE36CA 33.30 37.10 41.00 P4KE39A P4KE39CA 36.80 40.90 45.20 P4KE43A P4KE43CA 40.20 44.70 49.40 P4KE47A P4KE47CA 43.60 48.50 53.60 P4KE51A P4KE51CA 47.80 53.20 58.80 P4KE56A P4KE56CA 53.00 58.90 65.10 P4KE62A P4KE62CA 58.10 64.60 71.40 P4KE68A P4KE68CA 64.10 71.30 78.80 P4KE75A P4KE75CA 70.10 77.90 86.10 P4KE82A P4KE82CA 77.80 86.50 95.50 P4KE91A P4KE91CA 85.50 95.00 105.00 P4KE100A P4KE100CA 94.00 105.00 116.00 P4KE110A P4KE110CA 102.00 114.00 126.00 P4KE120A P4KE120CA 111.00 124.00 137.00 P4KE130A P4KE130CA 128.00 143.00 158.00 P4KE150A P4KE150CA 136.00 152.00 168.00 P4KE160A P4KE160CA 145.00 162.00 179.00 P4KE170A P4KE170CA 154.00 171.00 189.00 P4KE180A P4KE180CA 171.00 190.00 210.00 P4KE200A P4KE200CA 185.00 209.00 231.00 P4KE220A P4KE220CA 214.00 237.00 263.00 P4KE250A P4KE250CA 256.00 285.00 315.00 P4KE300A P4KE300CA 300.00 333.00 368.00 P4KE350A P4KE350CA 342.00 380.00 420.00 P4KE400A P4KE400CA 376.00 418.00 462.00 P4KE440A P4KE440CA 408.00 456.00 504.00 P4KE480A P4KE480CA 434.00 485.00 535.00 P4KE510A P4KE510CA 450.00 503.50 556.50 P4KE530A P4KE530CA 459.00 513.00 567.00 P4KE540A P4KE540CA 467.00 522.50 577.50 P4KE550A P4KE550CA For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% Certified RoHS Compliant UL File # E223026 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 PEAK PULSE CURRENT IPP (A) REVERSE LEAKAGE @ VRWM IR (µA) 39.0 36.3 33.9 30.6 28.3 26.3 24.6 22.5 19.3 18.2 16.1 14.8 13.4 12.3 10.9 9.9 9.0 8.2 7.6 6.9 6.3 5.8 5.3 4.8 4.5 4.0 3.6 3.3 3.0 2.7 2.5 2.3 2.0 1.9 1.8 1.7 1.5 1.3 1.2 1.0 0.85 0.75 0.68 0.61 0.57 0.55 0.54 0.52 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5