ETC DC11.0021.201

DC11
POWER ENTRY MODULES WITHOUT LINE FILTER
Actual information about approvals can be found on
http://www.schurter.com/approvals
C14
70° C
Description
Characteristics
- Panel mount:
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions:
Connector Protection class I, Line switch 1- or 2-pole
- Quick connect terminals 4.8 x 0.8 mm
- Alternative: version with line filter DC12
- Substitute for type KEB1; KEB2
- Ultra-compact design
- All single elements are already wired
Unwired versions available on request
- Line switch non-illuminated or illuminated
- Ideal for application with high transient loads
- Qualified for use in equipment according IEC/EN 60950
Other versions on request:
-
snap-in, panel thickness 1 and 3 mm
unwired versions
solder terminals
line switch with other rocker marking
line switch 1-pole
for protection class II
Technical data
Ratings IEC
Ratings UL/CSA
Dielectric strength
Allowable operation temp.
Degree of protection
Protection class
Terminals
Panel thickness s
Materials: Housing
Dimensiomounting
ns
Screw-on
1
www.schurter.com
10 A / 250 VAC; 50 Hz
12 A / 250 VAC; 50/60 Hz
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Quick connect terminals 4.8 x 0.8 mm
Screw-on: max 6 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-2
Appliance-inlet /-outlet
Line switch
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 10 A,
Protection class I
Rocker switch 1- or 2-pole, non-illuminated or illuminated red or green, acc.
to IEC 61058-1
Technical details GENERAL PRODUCT INFORMATION
DC11
POWER ENTRY MODULES WITHOUT LINE FILTER
Snap-in mounting
Diagrams
Line switch non-illuminated 2-pole
1) Line
2) Load
Line switch illuminated 2-pole
1) Line
2) Load
Line switch non-illuminated 1-pole
1) Line
2) Load
Variants
with internal connections
Order Number
Panel mounting
Panel thickness s Line switch
[mm]
Illumination
Color
DC11.0021.201
Snap-in
1.5
2-pole
l
red
DC11.0021.301
Snap-in
2
2-pole
l
red
DC11.0021.401
Snap-in
2.5
2-pole
l
red
DC11.0031.201
Snap-in
1.5
2-pole
l
green
DC11.0031.301
Snap-in
2
2-pole
l
green
DC11.0031.401
Snap-in
2.5
2-pole
l
green
DC11.0001.203
Snap-in
1.5
1-pole
DC11.0001.303
Snap-in
2
1-pole
DC11.0001.403
Snap-in
2.5
1-pole
DC11.0001.201
Snap-in
1.5
2-pole
DC11.0001.301
Snap-in
2
2-pole
DC11.0001.401
Snap-in
2.5
2-pole
DC11.0021.001
Screw-on
2-pole
l
red
DC11.0031.001
Screw-on
2-pole
l
green
DC11.0001.003
Screw-on
1-pole
DC11.0001.001
Screw-on
2-pole
Packaging unit
2
50 Pcs
www.schurter.com
Accessories
ACCESSORIES