T-1, (3-mm) Round, Quad PCB Mount LED Indicator, G245B Series www.ledidea.com G245B is designed to extend the reach of the LED indicators into the front bezel area where the PCB edge remains a distance away. The four lamps are positioned on a 0.3" pitch. The foot print of the pin-out is the same as the G244B but the lamps are centered 0.25" above the mounting plane and the lamps are significantly more forward. 27.6(1.09) 20.3(.80) 2.5(.10) 7.62(.30) 8.6(.34) 6.4(.25) 3.5(.13 ) Anode Typ 15.24(.60 ) 19.1(.75) Ø1.0(0.04) 2 pls Green Anode + – (Pinout for single color) Red or yellow Anode (typ for bi-color) Specify part desired as follows: G245B/Order Code LED1 + Order Code LED 2 + Order Code LED 3 + Order Code LED 4 For example: “G245B/I+Y+2G” designates an assembly with a red LED, a yellow LED and 2 green LED's from left to right ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation White Diffused Bipolar, Bicolor Color Typical Characteristics Order Code Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Hi Eff Red I 635 2.0 10 60 10-20 Green G 565 2.1 10 60 10-20 Yellow Y 585 2.0 10 60 10-20 10-20 Orange O 610 2.0 10 60 Hi Eff Red IT 635 2.0 40 40 10-20 Green GT 565 2.1 40 40 10-20 10-20 Yellow YT 585 2.0 40 40 Hi Eff Red I2 635 2.0 1.0 @ 2mA 60 2-10 Green G2 565 2.1 1.0 @ 2mA 60 2-10 2-10 Yellow Y2 585 2.0 1.0 @ 2mA 60 Hi Eff Red I5 635 - 10 60 5V Green G5 565 - 10 60 5V Yellow Y5 585 - 10 60 5V Red/Green EG 635/565 2.0/2.1 4/4 90 10-20 Yellow/Green YG 585/565 2.0/2.1 4/4 90 10-20 Red/Yellow EY 635/585 2.0/2.0 4/4 90 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G