T-1, (3-mm) Round, PCB Mount Right Angle Indicator, G61UDB/X Series www.ledidea.com The G61UDB/X has the lamp located at a nominal 2.3 mm(0.09") above the PCB. This series can be supplied with pinout reversed from that shown by adding “-RL” to the order code. 2.5±.5 4.6 6.35 7.4 3.0 Ø* 2.3 3.5 min + – 5.08 ref 2.54 Red or yellow Anode Green Anode + – (typ for single color) (typ for bi-color) Specify part desired as follows: G61UDB/Order Code For example: “G61UDB/G” designates an assembly with a diffused green LED. “G61UDB/G-RL” designates the same assembly with pins reversed ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation White Diffused Bipolar, Bicolor Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 (Deg) Recom. Op. If (mA) Color Order Code λ (nm) @If=20mA @If=10mA Hi Eff Red I 635 2.0 10 60 10-20 Green G 565 2.1 10 60 10-20 Yellow Y 585 2.0 10 60 10-20 Orange O 610 2.0 10 60 10-20 Hi Eff Red IT 635 2.0 40 40 10-20 Green GT 565 2.1 40 40 10-20 Yellow YT 585 2.0 40 40 10-20 Hi Eff Red I2 635 2.0 1.0 @ 2mA 60 2-10 Green G2 565 2.1 1.0 @ 2mA 60 2-10 Yellow Y2 585 2.0 1.0 @ 2mA 60 2-10 Hi Eff Red I5 635 - 10 60 5V 5V Green G5 565 - 10 60 Yellow Y5 585 - 10 60 5V Red/Green EG 635/565 2.0/2.1 4/4 90 10-20 Yellow/Green YG 585/565 2.0/2.1 4/4 90 10-20 Red/Yellow EY 635/585 2.0/2.0 4/4 90 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G 0510