IPT0118 Page 1 of 2 This is a phototransistor in miniature SMD package. It is molded in a water clear plastic with a flat top view lens. Chip PART NO. Lens Color Material IPT0118 Silicon Water Clear * Specifications subject to change without notice. Dimensions are in mm±0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507 IPT0118 Page 2 of 2 Absolute Maximum Ratings at Ta = 25 °C Parameter Symbol Rating Units Collector-Emitter Voltage VCEO 60 V Emitter-Collector Voltage VECO 5 V IC 20 mA Operating Temperature Topr -25 to +85 °C Storage Temperature Tstg -40 to +85 °C Soldering Temperature Tsol 260 °C Power Dissipation at (or below) 25°C Free Air Temperature Pd 75 mW Collector Current Electronic Optical Characteristics Parameter Symbol Min. Typ. Max Units Collector-Emitter Breakdown Voltage BVCEO 60 — — V Emitter-Collector Breakdown Voltage BVECO 5 — — V Collector-Emitter Saturation Voltage VCE(sat) — — 0.4 V Ee= 1 mW/cm2 Rise Time tr — 15 — µs Fall Time tf — 15 — µs VCE= 5 V IC=1 mA RL=1000 Ω Collector Dark Current ICEO — — 100 nA On State Collector Current IC(on) 0.5 0.8 — mA Ee= 1 mW/cm2 Peak Wavelength λp — 860 — nm — λ0.5 400 — 1200 nm — Range of Spectral Bandwidth Condition IC=100µA Ee= 0 mW/cm2 IE=100µA Ee= 0 mW/cm2 IC= 2 mA VCE= 20 V Ee= 0 mW/cm2 VCE= 5 V * Specifications subject to change without notice. Dimensions are in mm±0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507