T-1, (3-mm) Round, Tri-level PCB Mount LED Indicator, J183B Series The J183B is a right-angle view assembly of 3 T-1 LEDs arranged in a column. This indicator array is designed to be a more compact replacement part for similar units on the market and can be CMOS driven to save components. Recommended pitch is 4.4 mm(0.173") when a large number of units are placed side-by-side. This series can also be supplied with pinout reversed from that shown by adding “-RL” to the order code of the part number. 10.9(0.43") 4.3(0.17") 2.6 (0.1") 5.08(0.2") 14.7 (0.58") 5.08(0.2") 2.54(0.1") Red or yellow Anode 4.45 (.175) 2.54 typ (0.1") Green Anode + – (Pinout for single color) (typ for bi-color) Specify part desired as follows: J183B/Order Code LED1 + Order Code LED 2 + Order Code LED 3 For example: “J183B/H+Y+G” designates red LED on top, yellow LED in the middle and green LED on the bottom. “J183B/(H+Y+G)-RL” designates the same assembly with all leads reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=2 mA (Deg) Recom. Op. If (mA) 1.8 4.0 50 2 - 10 Color Order Code Red I 639 Green G 575 1.7 2.5 60 2 - 10 Yellow Y 591 1.85 4.0 45 2 - 10 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A