T-1, (3-mm) Round, Bi-level PCB Mount LED Indicator, G378B Series www.ledidea.com The G378B is one of the most popular indicators in LAN hubs and network controllers. Designed to save panel space, the assembly measures just over 4.3 mm(0.170") in width. Long arrays should be located on a pitch of 4.4 mm(0.173") to avoid crowding and tolerance build-up. This series can also be supplied with pinout reversed from that shown by adding “-RL” to the order code of the part number. 4.3 (0.17) 8.38(.33) 2.8 3 typ 5.08 LED 1 9.65 2.54 LED 2 3.5 min Anode typ 2.54 4.45 2.54 Red or yellow Anode Green Anode + – (Pinout for single color) (typ for bi-color) Specify part desired as follows: G378B/Order Code LED1 + Order Code LED 2 For example: “G378B/G+Y” designates an assembly with a green LED on top and a yellow LED on the bottom. “G378B/(G+Y)-RL” designates the same assembly with leads reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation White Diffused Bipolar, Bicolor Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 (Deg) Recom. Op. If (mA) Color Order Code λ (nm) @If=20mA @If=10mA Hi Eff Red I 635 2.0 10 60 10-20 Green G 565 2.1 10 60 10-20 Yellow Y 585 2.0 10 60 10-20 Orange O 610 2.0 10 60 10-20 Hi Eff Red IT 635 2.0 40 40 10-20 Green GT 565 2.1 40 40 10-20 Yellow YT 585 2.0 40 40 10-20 Hi Eff Red I2 635 2.0 1.0 @ 2mA 60 2-10 Green G2 565 2.1 1.0 @ 2mA 60 2-10 Yellow Y2 585 2.0 1.0 @ 2mA 60 2-10 Hi Eff Red I5 635 - 10 60 5V 5V Green G5 565 - 10 60 Yellow Y5 585 - 10 60 5V Red/Green EG 635/565 2.0/2.1 4/4 90 10-20 Yellow/Green YG 585/565 2.0/2.1 4/4 90 10-20 Red/Yellow EY 635/585 2.0/2.0 4/4 90 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G