T-1, (3-mm) Round, Bi-level PCB Mount LED Indicator Array, J784B Series The J784B is a right-angle view assembly of 8 T-1 LEDs arranged in 2 rows of 4 each and can be CMOS driven to save components. This indicator array is designed for handling ease to save assembly labor and to maintain alignment from column to column. The four pairs of LEDs are located on a 4.4 mm(0.173") pitch. A long array of arbitrary length can be made up by intermixing our J784B series with the matching J78B. This series can also be supplied with pinout reversed from that shown by adding “-RL” to the order code of the part number. 17.5 (0.69) 9.0(.355) 2.5±.5 3 typ 5.08 1 2 3 4 5 6 7 8 9.65 2.54 3.5 min 2.54 – Pin, LED 8 5.08 2.54 4.4 Red or yellow Anode + 1 – + 2 –+ 3 – + 4 – 5 6 7 8 + – + –+ –+ – Green Anode (single color lamps) (typ for bi-color) Specify part desired as follows:J784B/Order Code LED1 + Order Code LED 2 + ... + Order Code LED 8For example:“J784B/4H+4G” designates an assembly with 4 red LEDs on top and 4 green LEDs on the bottom.“J784B/(4H+4G)-RL” designates the same assembly with all lamps having reversed polarity. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If= 2 mA (Deg) Recom. Op. If (mA) 1.8 4.0 50 2 - 10 Color Order Code Red I 639 Green G 575 1.7 2.5 60 2 - 10 Yellow Y 591 1.85 4.0 45 2 - 10 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A