T-1, (3-mm) Round, PCB Mount Right Angle Indicator, J61UDB/X Series The J61UDB/X has the lamp located at a nominal 2.3 mm(0.09") above the PCB and can be CMOS driven to save components. This series can be supplied with pinout reversed from that shown by adding “-RL” to the order code. 2.5±.5 4.6 6.35 7.4 3.0 Ø* 2.3 3.5 min + – 5.08 ref 2.54 Red or yellow Anode Green Anode + – (typ for single color) (typ for bi-color) Specify part desired as follows: J61UDB/Order Code For example: “J61UDB/G” designates an assembly with a diffused green LED. “J61UDB/G-RL” designates the same assembly with pins reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Color Typical Characteristics Order Code Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If= 2 mA (Deg) Recom. Op. If (mA) Red I 639 1.8 4.0 50 2 - 10 Green G 575 1.7 2.5 60 2 - 10 Yellow Y 591 1.85 4.0 45 2 - 10 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A 0510