J Series, Small View Angle, Blue & White LEDs, Water Clear LED, 4381 J Series T-1 3/4, 5mm Round, Hi-Efficiency, Tapered Lens The J series lamps are made with AlInGaP chips which can be used for standard brightness at low current (2mA) or super brightness at standard current (20mA). This tapered lens is ideal for higher intensity when a smaller viewing angle is acceptable. The Blue LEDs are made with GaN/SiC (428nM) and InGaN/SiC (468nM) chips. The White LEDs are made with GaN chips. Blue and white should only be used when these colors are necessary for the application and higher cost is acceptable. 8.6±.3 0.5 5.0±.2Ø Anode 2.54 1.0 min 1.0±.2 5.6±.3 26.4 min GENERAL INFORMATION Operating Temperature Range Storage Temperature Range Reflow Soldering Temperature -30 °C to +85 °C -55 °C to +100 °C 260 °C for 5 sec max APPLICATION INFORMATION (ALL RATINGS AT 25 °C AMBIENT) Peak Part No. JRC4381 Emitted Color Red λ Absolute Maximum Ratings ∆λ Pd If (mA) Ir E/O Characteristics Iv (mcd) @If=20mA Vr Vf (V) @ If=20mA 2Θ1/2 (nM) (nM) (mW) dc 1/10 duty @ 1 khz @Vr=5V (µA) (V) 2mA Min Typ Min Typ (Deg) 632 20 60 25 160 10 5 69 950 2460 2.0 2.4 6 JGC4381 Green 575 20 60 25 160 10 5 27 300 440 2.0 2.4 6 JYC4381 Yellow 591 15 60 25 160 10 5 87 1160 3100 2.0 2.4 6 JOC4381 Orange 621 18 60 25 160 10 5 93 1240 3290 2.0 2.4 6 JDC4381 DeepRd 650 20 60 25 160 10 5 70 970 1680 2.0 2.4 6 JYOC4381 YelOrng 611 17 60 25 160 10 5 90 1200 3200 2.0 2.4 6 IUBC4381-7 Blue 468 26 120 25 - 50 5 - 500 1000 3.5 4.0 6 IUWC4381 White - - 120 25 100 10 5 - 1500 2300 3.6 4.0 13 Specifications subject to change without notice. Dimensions are in mm±0.3 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0508 J–24