Epoxy Dipped Radial Lead Metallized Polyphenylene Sulphide Film Capacitors MLR • Automotive • Audio • Polycarbonate alternative • • • Temperature stable High temperature RoHS compliant Operating Temperature Range -40°C to +125°C Capacitance Tolerance ±10% at 1kHz, 20°C Rated Voltage 100 VDC For T> +105°C the applied voltage must be decreased by 1.5% per °C Freq. (kHz) Dissipation Factor (max) at 20°C 1 100 .1% .3% Insulation Resistance 15000MΩ Minimum, 100VDC applied for 60 seconds 1,000 hours at 125% of rated VDC and at 105°C Load Life Test Capacitance Change ≤5% of initial measured value Dissipation Factor ≤200% of maximum specified value Insulation Resistance >50%of mimimum specified value 500 hours at 40°C ±2°C with 90-95% relative humidity and 100% of rated WVDC ≤5% change from initial value. Capacitance Change Damp Heat Test ≤0.005 at 1kHz and 25°C Dissipation Factor Insulation Resistance >33%of minimum specification Self-inductance ≤1 nH/mm along the capacitor pitch and lead wire length. Dielectric Strength 150% of rated WVDC applied between the terminals for 60 seconds 200% of rated WVDC applied to the terminals and the case for 1 to 5 seconds Capacitance Drift Factor ≤1.0% up to 40°C after 2 years Temperature Coefficient 0 ppm/°C, ± 100ppm/°C Dielectric Polyphenylene sulphide Electrodes Vacuum deposited metal layers Construction Wound Metalized film Leads Lead free Tinned copper wire Coating Flame retardant epoxy sealed resin (UL 94V-O) Capacitance (µF) WVDC 0.1 0.12 0.15 0.18 0.22 0.27 0.3 0.33 0.36 100 100 100 100 100 100 100 100 100 PART NUMBER 104MLR100K 124MLR100K 154MLR100K 184MLR100K 224MLR100K 274MLR100K 304MLR100K 334MLR100K 364MLR100K dv/dt (v/µs) Maximum RMS current 1kHz,20°C. LxHxT (mm) S (mm) d (mm) 15 15 15 15 15 15 15 15 15 0.18 0.16 0.12 0.1 0.09 0.072 0.06 0.05 0.04 13x9x5.5 13x9.5x6 13x9.5x6 13x10x6 13x10x6 13x11x7 13x12x7.5 13x12x8 13x12x8 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 9.0 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 T L max max H max G 15 min. d S±1.5 ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 1 MLR Epoxy dipped Radial lead Metallized Polphenylene Sulphide Film Capacitors Enviromental and frequency characterisitc graphs Capacity Change (%) Temperature vs Capacitance Temperature vs tanδ 5 4 3 2 1 0 -1 -2 -3 -4 -5 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 (°C) Temperature Dissipation Factor (tanδ) vs Frequency. Frequency Character 0.5 0.4 0.3 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 1.0 Dissiapation Factor (%) Capacity Change (%) 0.2 0.1 -1.0 103 2 5 104 2 4 5 105 2 5 106 103 2 5 104 2 5 105 0.01 2 5 106 Frequency (Hz) ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com