W2530 SERIES DC/DC MODULES Applications • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The W2530 Familiy of high efficiency DC/DC converters offer power levels of up to 30 Watt, which exceeds that of other bricks with the same Industry-Standard Pinouts, while providing smaller footprints. With a wide input voltage range and single and multi-outputs, these converters provide versatility without sacrificing the board space. All models feature an input Pi filter and short circuit protection. The fully enclosed, encapsulated construction achieves very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. SPECIFICATIONS Specifications & Features Summary Input Specifications Input Voltage Range • 500V, 10MΩ input-to-output isolation • No airflow or heatsink required • Enclosed six-sided metal shield construction for low EMI/RFI • Efficiency to 85% • 2:1 Input Range • Pi Input Filter • Continuous Short Circuit Protection Approval Pending • Remote On/Off Control • Delivers up to 30W in 2”x2” package with Industry-Standard Pinouts 12V----------9-18V 24V--------18-36V 48V--------36-72V Pi Type Input Filter Output Specifications Voltage Accuracy Single Output +/-2.0% max. Dual+Output -Output Triple, 5V 12V / 15V Voltage Balance(Dual) Transient Response: Single, 25% Step Load Change Dual,FL-1/2L +/- 1% Error Band External Trim Adj. Range Ripple and Noise, 20MHz BW Model Num VIn VOut IOut INo Load IFull Load Eff Case W2530-12S5 9-18 VDC 5.0 VDC 5.0A 30.0 mA 2675.0 mA 78% W2530 W2530-12S12 9-18 VDC 12.0 VDC 2.5A 30.0 mA 3050.0 mA 82% W2530 W2530-12S15 9-18 VDC 15.0 VDC 2.0A 30.0 mA 3050.0 mA 82% W2530 W2530-12D5 9-18 VDC ±5.0 VDC ±2.5A 35.0 mA 2675.0 mA 78% W2530 W2530-12D12 9-18 VDC ±12.0 VDC ±1.25A 35.0 mA 3050.0 mA 82% W2530 W2530-12D15 9-18 VDC ±15.0 VDC ±1.0A 35.0 mA 3050.0 mA 82% W2530 W2530-12T5-12 9-18 VDC ±12.0/5.0 VDC ±0.31A/3.5A 35.0 mA 2640.0 mA 79% W2530 W2530-12T5-15 9-18 VDC ±15.0/5.0 VDC ±0.25A/3.5A 35.0 mA 2640.0 mA 79% W2530 W2530-12S3.3 9-18 VDC 3.3 VDC 5.0A 30.0 mA 1860.0 mA 74% W2530 W2530-24S5 18-36 VDC 5.0 VDC 5.0A 30.0 mA 1336.0 mA 79% W2530 W2530-24S12 18-36 VDC 12.0 VDC 2.5A 30.0 mA 1525.0 mA 82% W2530 W2530-24S15 18-36 VDC 15.0 VDC 2.0A 30.0 mA 1525.0 mA 82% W2530 W2530-24D5 18-36 VDC ±5.0 VDC ±2.5A 30.0 mA 1336.0 mA 79% W2530 W2530-24D12 18-36 VDC ±12.0 VDC ±1.25A 30.0 mA 1470.0 mA 85% W2530 W2530-24D15 18-36 VDC ±15.0 VDC ±1.0A 30.0 mA 1470.0 mA 85% W2530 W2530-24T5-12 18-36 VDC ±12.0/5.0 VDC ±0.31A/3.5A 30.0 mA 1320.0 mA 80% W2530 W2530-24T5-15 18-36 VDC ±15.0/5.0 VDC ±0.25A/3.5A 30.0 mA 1320.0 mA 80% W2530 W2530-24S3.3 18-36 VDC 3.3 VDC 5.0A 30.0 mA 920.0 mA 75% W2530 W2530-48S5 36-72 VDC 5.0 VDC 5.0A 20.0 mA 660.0 mA 79% W2530 W2530-48S12 36-72 VDC 12.0 VDC 2.5A 20.0 mA 765.0 mA 82% W2530 W2530-48S15 36-72 VDC 15.0 VDC 2.0A 20.0 mA 765.0 mA 82% W2530 W2530-48D5 36-72 VDC ±5.0 VDC ±2.5A 25.0 mA 660.0 mA 79% W2530 W2530-48D12 36-72 VDC ±12.0 VDC ±1.25A 25.0 mA 735.0 mA 85% W2530 W2530-48D15 36-72 VDC ±15.0 VDC ±1.0A 25.0 mA 735.0 mA 85% W2530 W2530-48T5-12 36-72 VDC ±12.0/5.0 VDC ±0.31A/3.5A 25.0 mA 655.0 mA 80% W2530 W2530-48T5-15 36-72 VDC ±15.0/5.0 VDC ±0.25A/3.5A 25.0 mA 655.0 mA 80% W2530 W2530-48S3.3 36-72 VDC 3.3 VDC 5.0A 20.0 mA 460.0 mA 75% W2530 Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. +/-2.0% max. +/-3.0% max. +/-2.0% max. +/-5.0% max. +/-1.0% max. <500u sec. <500u sec. +/-10% 10mV RMS. Max. 75mV p-p max. Temperature Coefficient Short Circuit Protection Line Regulation, Single/Dual Triple Load Regulation, Single/Dual Triple General Specifications Efficiency Isolation Voltage Isolation Resistance Switching Frequency Case Grounding Operating Temperature Range Case Temperature Cooling Storage Temperature Range EMI / RFI Dimensions +/-0.02% / oC Continuous +/-0.5% max. +/-1.0% max. +/-1.0% max. +/-5.0% max. Up to 85% 500 VDC min 109 ohms 300KHz, min Capacity Coupled to Input -25oC to +71oC 100oC max. Free-Air Convection -55oC to +105oC Six Sided Continuous Shield 2X2X0.4 Inches (50.8X50.8X10.2mm) Case Material Black Coated Copper w/Non-Conductive Base Notes: BOTTOM VIEW W2530 FAMILY 1. Measured From High Line to Low Line 2. Measured From Full Load to 1/4 Load The output voltage can be trimmed (±10%) using an external resistor. To trim the output up (down) connect a resistor between pins 5 and 6 (7). A 10KΩ trim pot can also be used to make the output variable. Connect the wiper to pin 5 and make the other connections to pins 6 and 7. 8 0.40 [10.16] 0.60 [15.24] 3 0.40 [10.16] 0.30 [7.62] 0.10 [2.54] REMOTE ON/OFF CONTROL 7 4 0.80 [20.32] 6 2 2.00 [50.80] 0.40 [10.16] 1 5 1.80 [45.72] SIDE VIEW CMOS or Open Collector TTL >+5.5Vdc or Open Circuit <1.8Vdc 10mA 100K ohms (Ein 0 Vdc to 9 Vdc Referenced to Input Minus Full output power is available at ambient temperatures of -25C to +60C with no airflow. Above +60C output power linearly derates to 0% at +100C. 0.20 [5.08] 2.00 [50.80] 0.20 [5.08] Logic Compatibility EC-On EC-Off Shutdown Idle Current Input Resistance Control Common 0.35 [8.89] All dimensions are in inches [mm]. All pins are dia. 0.040 [1.02] Tolerances: .XX= ±0.04, .XXX= ±0.010 Consult factory for hundreds of other input / output voltage configurations Pin # 1 2 3 4 5 6 7 8 • S(ingle) On/Off No Pin Vin Vin + Trim Vout Vout + No Pin D(ual) On/Off No Pin Vin Vin + Trim Vout Common Vout + • T(riple) On/Off No Pin Vin Vin + - Aux. Out Common +5Vout + Aux. Out Triple Output Loading Table (1) Amperes Voltage Min. (2) Nom. +12(15) or -12(15) 0.10 0.31(0.25) +5 +12(15) or -12(15) 0.50 0.10 0.31(0.25) Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-781-551-5500 Fax: 1-781-551-5555 Rev. D