IRONWOOD CA-PLCC28-Z-P-T-01

1.500"
1.500"
Top View
1
0.901"
5
0.867"
0.191"
2
4
1
Substrate: 0.0625"±0.007" FR4/G10 or equivalent high
temp material. 1/2 oz. Cu clad. SnPb plating
2
Pins: Material- Brass Alloy 360 1/2 hard; finish- 10µ"
Au over 50µ" Ni (min.).
4
Leads: material- BeCu Alloy 194; plating- 80/20 SnPb.
5
Test points: material- Phosphor Bronze; plating- Sn
over 50µ" Ni. Gold flash on contact end.
Side View
Description: CARRIER ADAPTOR
28 position PLCC ZIF socket with test points to 28 position PLCC plug.
All tolerances: ±0.005" (unless stated otherwise). Materials and specifications are subject to change without notice.
CA-PLCC28-Z-P-T-01 Drawing
© 1998 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Status: released
Scale: 2:1
Rev: B
Drawing by: P. LeBeau
Date: 4/21/98
File:CA-PLCC28-Z-P-T-01 Dwg
Modified:

Open as PDF

Similar pages: IRONWOOD CA-PLCC84-Z-C-T-01; IRONWOOD CA-PLCC84-Z-M-T-01; IRONWOOD CA-PLCC68-D-P-T-01; IRONWOOD CA-PLCC068-Z-P-T-01; IRONWOOD CA-PLCC44-D-J-T-01; IRONWOOD CA-QFE52SA-L-Z-T-01; IRONWOOD CA-QFE44SE-M-Z-T-01; IRONWOOD CA-PLCC068-Z-J-T-01; IRONWOOD CA-PLCC44-D-P-T-01; IRONWOOD CA-QFE44SE-L-Z-T-01; IRONWOOD CA-QFE52SF-L-Z-T-01; IRONWOOD CA-QFE44SH-L-Z-T-01; IRONWOOD CA-QFE44SB-L-Z-T-01; IRONWOOD CA-QFE32SA-M-Z-T-02F; IRONWOOD CA-QFE32SA-L-Z-T-02F; IRONWOOD CA-PLCC44-D-M-T-01; IRONWOOD CA-PLCC32-Z-C-T-01; IRONWOOD CA-PLCC32-Z-M-T-01; IRONWOOD CA-QFE32SA-L-Z-T-02; IRONWOOD CA-PLCC068-D-J-T-01; IRONWOOD CA-PLCC20-Z-J-T-01; IRONWOOD CA-PLCC52-Z-M-T-01