53.34mm 2.100" 2.54mm typ. 0.100" Top View 53.34mm 2.100" 40.67mm 1.601" 0.64mm sqr. 0.025" 20.89mm 0.823" 10.48mm 0.413" 39.62mm 1.56" assembled 5.55mm 0.219" 17.02mm [0.670"] Target PLCC chip Side View 1 Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"] FR4/G10 or equivalent high temp material. 17µm [1/2 oz.] Cu clad. SnPb plating. 2 Pins: material- Brass Alloy 360 1/2 hard; finish0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.). 3 Pins: shell material- Brass Alloy 360 1/2 hard; finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.). Contact material- BeCu; finish 0.25µm [10µ"] Au over 2.54µm [100µ"] Ni (min. ). 5 Test points: material- Phosphor Bronze; plating- Sn over 1.27µm [50µ"] Ni. Gold flash on contact end. Description: PLCC Carrier Adaptor 84 position PLCC ZIF socket to 84 position PLCC clip with test points. Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice. CA-PLCC84-Z-C-T-01 Dwg © 2001 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Drawing: M. Tully File: CA-PLCC084-Z-C-T-01 Dwg.mcd Scale: 1:0.75 Rev: A Date: 2/14/01 ECO#