IRONWOOD CA-QFE64SD-L-N-T-01

2.350"
5
1.975"
1
0.100"
Top View
2
0.285" assembled
Surface-mountable
leadless (-L) foot.
Side View
0.443"
1
Target Board 64 Position QFP Land Pattern
2
(QFE64SD Foot Print Spec)
5
Substrate: 0.0625"±0.007" FR4/G10 or
equivalent high temp material. 1/2 oz. Cu clad.
SnPb plating
Pins: Material- Brass Alloy 360 1/2 hard; finish10µ" Au over 50µ" Ni (min.).
Test points: material- Phosphor Bronze; platingSn over 50µ" Ni. Gold flash on contact end.
Description: Carrier Adaptor
64 position interface board with test points to 64 position surface mountable QFP emulator foot. The 2 piece adaptor interconnects via
gold plated (0.05" center) Mini-grid socket interface.
All tolerances are ±0.005" unless otherwise specified. Materials and specifications are subject to change without notice.
CA-QFE64SD-L-N-T-01 Dwg
© 1998 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Status: Released
Scale: 3:2
Rev: B
Drawing by: EV Swanosn
Date: 5/15/98
File: CA-QFE64SD-L-N-T-01 Dwg
Mod: 5/18/98

Open as PDF

Similar pages: IRONWOOD CA-QFE48SB-L-Z-T-02; IRONWOOD CA-PLCC028-Z-J-T-01; IRONWOOD CA-QFE44SH-L-Z-T-01; IRONWOOD CA-QFE32SA-L-Z-T-02; IRONWOOD CA-PLCC068-D-J-T-01; IRONWOOD CA-QFE44SA-L-Z-T-01; IRONWOOD CA-QFE52SB-L-Z-T-01; IRONWOOD CA-QFE64RC-L-Z-T-01; IRONWOOD CA-QFE52SA-L-Z-01; IRONWOOD CA-MLF32A-A-Z-T-01; IRONWOOD CA-MLF48A-A-Z-T-01; IRONWOOD CA-QFE44SA-M-Z-T-01; IRONWOOD CA-QFE44SE-L-Z-T-01; IRONWOOD CA-QFE44SE-M-Z-T-01; IRONWOOD CA-PLCC20-Z-M-T-01; IRONWOOD CA-QFE32SA-M-Z-T-02F; IRONWOOD CA-QFE32SA-L-Z-T-02F; IRONWOOD CA-QFE44SB-L-Z-T-01; IRONWOOD CA-QFE52SA-M-Z-T-01; IRONWOOD CA-QFE52SF-M-Z-T-01; IRONWOOD CA-QFE64SA-L-Z-T-01; IRONWOOD CA-QFE52SF-L-Z-T-01