IRONWOOD CA-PLCC028-Z-J-T-01

1.500"
1.500"
1
Top View
5
0.822"
1.294"Assembled
0.218"
0.050"
0.018"±0.001"dia.typ.
2
4
0.372"
0.206"
0.125"
0.017"
Side View
0.442"
1
Substrate: 0.0625"±0.007" FR4/G10 or equivalent high
temp material. 1/2 oz. Cu clad. SnPb plating
2
Pins: Material- Brass Alloy 360 1/2 hard; finish- 10µ"
Au over 50µ" Ni (min.).
4
Leads: material- BeCu Alloy 194; plating- 80/20 SnPb.
5
Test points: material- Phosphor Bronze; plating- Sn
over 50µ" Ni. Gold flash on contact end.
Description:Carrier adaptor;
2 piece pluggable adaptor, PLCC ZIF socket with test probes to surface mountable PLCC emulator foot.
All tolerances: ±0.005" (unless stated otherwise). Materials and specifications are subject to change without notice.
CA-PLCC028-Z-J-T-01 DRAWING
© 1994 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
Status: Released
Scale: 2:1
Drawing: M. Lund
File: PCA-PLCC028-Z-J-T-01 DWG
Rev: D
Date: 8/17/94
Modified: 7/31/98

Open as PDF

Similar pages: IRONWOOD CA-PLCC068-D-J-T-01; IRONWOOD CA-QFE52SA-M-Z-T-01; IRONWOOD CA-PLCC44-D-J-T-01; IRONWOOD CA-QFE52SA-L-Z-T-01; IRONWOOD CA-PLCC44-D-P-T-01; IRONWOOD CA-PLCC84-Z-C-T-01; IRONWOOD CA-QFE52SF-M-Z-T-01; IRONWOOD CA-QFE44SH-L-Z-T-01; IRONWOOD CA-QFE52SF-L-Z-T-01; IRONWOOD CA-QFE44SB-L-Z-T-01; IRONWOOD CA-QFE64SA-L-Z-T-01; IRONWOOD CA-PLCC68-D-P-T-01; IRONWOOD CA-QFE44SE-L-Z-T-01; IRONWOOD CA-QFE64SD-L-N-T-01; IRONWOOD CA-QFE44SE-M-Z-T-01; IRONWOOD CA-PLCC52-Z-M-T-01; IRONWOOD CA-PLCC084-Z-P-T-01; IRONWOOD CA-QFE32SA-L-Z-T-02; IRONWOOD CA-QFE32SA-L-Z-T-02F; IRONWOOD CA-PLCC32-Z-P-01; IRONWOOD CA-PLCC32-Z-J-T-01; IRONWOOD CA-PLCC068-Z-J-T-01