. Dimensions in mm 0 ISDA20 7 6 5 1 3 4 4 OPTION SM OPTION G SURFACE MOUNT 1.25 0.75 7.62 3.4 3.9 6.9 FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High operating Current ( 200mA ) l High operating Voltage ( 200V ) l High Isolation Voltage (3.75kVRMS ) l No moving parts l High reliability l Arc-Free without snubber circuits l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l Telecommunications l Industrial systems controllers l Measuring instruments l Signal transmission between systems of different potentials and impedances 0.47 7.62 ABSOLUTEMAXIMUMRATINGS (25°C unless otherwise specified) Storage Temperature -40°C to + 100°C Operating Temperature -40°C to + 85°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C INPUT DIODE Forward Current Reverse Voltage 50mA 5V OUTPUT MOSFET Load Voltage ( AC peak or DC ) Continous Load Current Peak Current ( 10mS ) 200V 200mA 400mA 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, TS25 1YD England Tel: (01429)863609 Fax : (01429) 863581 e-mail [email protected] http://www.isocom.com 6/12/06 6 5 9.78 The ISDA20 is a 2-Form A solid state relay in an 8 pin DIL package. The ISDA20 utilises MOSFET technology that is optically coupled to a highly efficient GaAlAs infrared light emitting diode. 10.46 9.86 3 1 2 7.62 DESCRIPTION 0.6 0.1 2 7.62 ISDA20 6.4 8 ISOCOM COMPONENTS ASIA LTD Hong Kong Office, 1712-1713 Laurels Industrial Centre, 32 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel: +852 2995 9217 Fax : +852 8161 6292 e-mail [email protected] DC93086 ELECTRICAL CHARACTERISTICS ( TA= 25°C Unless otherwise noted ) PARAMETER Input MIN Forward Voltage (VF) TYP MAX UNITS TEST CONDITION 1.0 Reverse Current (IR) Output On state Resistance ( Ron ) 6.0 Off state Leakage Current (ILK) Coupled 1.4 V IF = 10mA 10 µA VR = 5V 10.0 Ohm IF = 10mA, IL = 200mA 1 uA IF = 0mA, IV = 200V Turn-On Time ( Ton ) 0.2 0.5 mS IF = 10mA, IL = 200mA Turn-Off Time ( Toff ) 0.03 0.3 mS IF = 10mA, IL = 200mA Ouput Capacitance 100 pF f = 1MHz Capacitance 1.0 pF f = 1MHz Isolation Voltage 3750 Vrms 1 minute ( Note 1 ) Isolation Resistance 5 Gohm DC= 500V ( Note 1 ) Note 1 Measured with input leads shorted together and output leads shorted together. Note 2 Special Selections are available on request. Please consult the factory. 6/12/06 DC93086