SAW Bandpass Filter F1G12 Features z RF bandpass filter z High attenuation z Usable bandwidth 20MHz z No matching 50Ω single-ended operation z Ceramic Surface Mounted Device (SMD) Package 1.00±0.15 1.90±0.15 0.44 3.80±0.15 0.64±0.05 Package Dimensions ITF 1G12 3 6 1 0.44 5 5 2 4 4 3 1.27±0.05 2 6 1.40±0.15 3.80±0.15 1 Dimensions shown are nominal in millimeters Pin Configuration Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range °C -10 25 60 Storage Temperature Range °C -40 - 85 Power Handling Capability dBm - - - Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G12 Rev. Date 2004-11-01 Rev. NR1008-AS02 1/7 SAW Bandpass Filter F1G12 Specifications Fc = 1100.0MHz Terminating source impedance : 50Ω and matching network Terminating load impedance : 50Ω and matching network Minimum Typical Maximum MHz - 1100.0 - Insertion Loss (Fc +/- 10 MHz) dB - 4.0 5.0 Amplitude Ripple (Fc +/- 10 MHz) dB - 0.8 1.5 Absolute Group Delay at Fc nsec - 40 - Group Delay Variation (Fc +/- 10 MHz) nsec - 20 - - 1.5 2.0 dB 30 30 40 40 - ppm/°C - -32 - Center Frequency ( Fc ) VSWR (Fc +/- 10 MHz) Relative Attenuation … ~ Fc - 50 MHz Fc + 50 MHz ~ … Temperature Coefficient of Frequency Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G12 Rev. Date 2004-11-01 Rev. NR1008-AS02 2/7 SAW Bandpass Filter F1G12 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration ITF1) 1G122) 1) Manufacturer name 2) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G12 Rev. Date 2004-11-01 Rev. NR1008-AS02 3/7 SAW Bandpass Filter F1G12 Typical Performance ( at 25℃ ) CH1 S21 LOG 10 dB/ REF 0 dB 2 21 Apr 2004 03:22:04 2: - . 64100 dB 20. 000 000 MHz 1 PRm CH1 Markers mean : -3 . 1812 dB Cor REF=1 s. dev : . 24510 dB p-p : . 95350 dB CENTER 1 100 . 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB 1 SPAN 200 . 000 000 MHz 21 Apr 2004 03:24:25 1: -4 . 1355 dB 1 100 . 000 000 MHz PRm Cor START . 030 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 STOP 3 000 . 000 000 MHz Part No. F1G12 Rev. Date 2004-11-01 Rev. NR1008-AS02 4/7 SAW Bandpass Filter F1G12 Input / Output VSWR Charts CH1 S11 SWR 1 / 21 Apr 2004 03:23:04 1: 1. 6456 1 100 . 000 000 MHz REF 1 CH1 PRm PRm Cor Cor S22 SWR 1 / 21 Apr 2004 03:23:15 1: 1. 6173 1 100 . 000 000 MHz REF 1 1 1 CENTER 1 100 . 000 000 MHz SPAN 200 . 000 000 MHz CENTER 1 100 . 000 000 MHz SPAN 200 . 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 7. 6826 1: 31. 546 21 Apr 2004 03:22:41 1. 1116 nH 1 100 . 000 000 MHz CH1 PRm PRm Cor Cor S22 1 U FS 21 Apr 2004 03:22:55 1. 2849 nH 1 100 . 000 000 MHz 1 1 CENTER 1 100 . 000 000 MHz 8. 8809 1: 32. 539 SPAN 200 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 CENTER 1 100 . 000 000 MHz SPAN 200 . 000 000 MHz Part No. F1G12 Rev. Date 2004-11-01 Rev. NR1008-AS02 5/7 SAW Bandpass Filter F1G12 Packing Specification 1. Reeling Quantity : 1000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F1G12 Rev. Date 2004-11-01 Rev. NR1008-AS02 6/7 SAW Bandpass Filter F1G12 Carrier Tape Dimensions [unit : mm] A 4.30 ± 0.1 B 4.30 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G12 Rev. Date 2004-11-01 Rev. NR1008-AS02 7/7