SAW Bandpass Filter F2G23 Features RF bandpass filter High attenuation No matching 50Ω single-ended operation Ceramic Surface Mounted Device (SMD) Package ( 3.0 mm * 3.0 mm ) RoHS Compliant Package Dimensions 1 2 I 2G23 3 6 6 1 5 5 2 4 4 3 Pin Configuration Dimensions shown are nominal in millimeters 2 Input Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range ℃ -20 25 70 Storage Temperature Range ℃ -30 25 85 Power Handling Capability dBm - 10 - Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCNC02-F2G23 Rev. Date 2012-3-29 Rev. AS 01 1/7 SAW Bandpass Filter F2G23 Specifications Fc = 2250 MHz Terminating source impedance : 50Ω Terminating load impedance : 50Ω Minimum Typical Maximum Unit Center Frequency ( Fc ) - 2250 - MHz Insertion Loss (In Fc +/-50 MHz) - 3.2 4.5 dB Insertion Loss (In 2230 ~ 2240 MHz) - 2.2 3.0 dB Amplitude Ripple (In Fc +/- 50 MHz) - 1.9 3.0 dBp-p VSWR (In Fc +/- 50 MHz) - 1.9 2.5 - D.C ~ 2160 MHz 25 28 - dB 2340 ~ 4000 MHz 25 28 - Relative Attenuation Input/Output Impedance 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCNC02-F2G23 Rev. Date 2012-3-29 Rev. AS 01 2/7 SAW Bandpass Filter F2G23 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I 2) 2G23 3) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCNC02-F2G23 Rev. Date 2012-3-29 Rev. AS 01 3/7 SAW Bandpass Filter F2G23 Typical Performance ( at 25℃ ℃) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCNC02-F2G23 Rev. Date 2012-3-29 Rev. AS 01 4/7 SAW Bandpass Filter F2G23 Input / Output VSWR Charts Input / Output Smith Charts I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCNC02-F2G23 Rev. Date 2012-3-29 Rev. AS 01 5/7 SAW Bandpass Filter F2G23 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. NCNC02-F2G23 Rev. Date 2012-3-29 Rev. AS 01 6/7 SAW Bandpass Filter F2G23 Carrier Tape Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCNC02-F2G23 Rev. Date 2012-3-29 Rev. AS 01 7/7