JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1268 1P2T SOLID STATE RF SWITCH Frequency Range 100-500 MHz Configuration 1P2T Impedance 50 Ohms nominal VSWR 1.25:1 maximum Insertion Loss 0.5 dB maximum Isolation 55 dB minimum Switching Speed 40 microseconds (50% TTL to 10% or 90% RF) RF Input Power 100 Watts average (cold switch) 500 Watts peak (cold switch) 100 Watts average (hot switch*) Control (1 line) TTL Low for J1-COM TTL High for J2-COM (off port is reflective) DC Supply +12Vdc to +15 Vdc @ 250 mA nominal +5 Vdc @ 40 mA nominal RF Connector BNC, SMA, TNC or N female Operating Temperature Range -20ºC to +70ºC Storage Temperature Range -55ºC to +85ºC Physical Size See outline drawing 092-3022 * If switch rate exceeds 1000 cycles per second, external heatsinking will be required to maintain a maximum case temperature of +70ºC. ECR/ECN # Page 1 of 1 DATE REV APPR / DATE 9999 04/03/2002 02/10/2003 A TRS 04/28/2004 15778 04/30/2008 B BAC 04/30/2008 ECR/ECN # JFW FORM E-7-F REV F DATE REV APPR / DATE