Specs

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50S-1268
1P2T SOLID STATE RF SWITCH
Frequency Range
100-500 MHz
Configuration
1P2T
Impedance
50 Ohms nominal
VSWR
1.25:1 maximum
Insertion Loss
0.5 dB maximum
Isolation
55 dB minimum
Switching Speed
40 microseconds
(50% TTL to 10% or 90% RF)
RF Input Power
100 Watts average (cold switch)
500 Watts peak (cold switch)
100 Watts average
(hot switch*)
Control (1 line)
TTL Low for J1-COM
TTL High for J2-COM
(off port is reflective)
DC Supply
+12Vdc to +15 Vdc @ 250 mA nominal
+5 Vdc @ 40 mA nominal
RF Connector
BNC, SMA, TNC or N female
Operating Temperature Range
-20ºC to +70ºC
Storage Temperature Range
-55ºC to +85ºC
Physical Size
See outline drawing 092-3022
* If switch rate exceeds 1000 cycles per second, external
heatsinking will be required to maintain a maximum case
temperature of +70ºC.
ECR/ECN #
Page 1 of 1
DATE
REV
APPR / DATE
9999
04/03/2002
02/10/2003
A
TRS 04/28/2004
15778
04/30/2008
B
BAC 04/30/2008
ECR/ECN #
JFW FORM E-7-F REV F
DATE
REV
APPR / DATE