SRF1535 THRU SRF15200 R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 35 to 200 Volts Forward Current - 15Amperes S E M I C O N D U C T O R FEATURES ITO-220AB Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction 0.190(4.75) 0.165(4.25) 0.145(3.55) Guard ring for overvoltage protection 0.128(3.25) DIA Low power loss ,high efficiency 0.130(3.31) 0.110(2.81) 0.111(2.83) High current capability ,Low forward voltage drop 0.101(2.57) High surge capability 0.174(4.42) 0.165(4.18) For use in low voltage ,high frequency inverters, 0.410(10.41) 0.388(9.85) PIN 1 2 3 JF SRF1560 free wheeling ,and polarity protection applications Dual rectifier construction 0.666(16.92) 0.325(8.25) 0.633(16.08) 0.321(8.15) 0.571(14.5) 1.161(29.5) 0.177(4.50) High temperature soldering guaranteed:260° C/10 seconds,, 0.610(15.5) 0.136(3.45) 1.083(27.5) 0.138(3.50) 0.116(2.95) 0.25"(6.35mm)from case 0.551(14.00) 0.512(13.00) Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 0.029(0.73) MECHANICAL DATA 0.019(0.47) 0.104(2.64) 0.096(2.44) 0.029(0.73) 0.019(0.47) Case: JEDEC ITO-220AB molded plastic body Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: As marked. Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load, derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current See Fig.1 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 15 A Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T C =25 C T C =125 C 150 200 42 70 105 140 60 100 150 200 SRF 1560 35 45 50 60 35 50 25 32 35 45 SRF 15A0 Units Volts Volts Volts 15.0 Amps IFSM 150.0 Amps VF IR R TJ TSTG 0.60 0.75 0.90 0.85 0.95 Volts 0.5 30 50 3.0 JC -65 to+125 mA C/W -65 to+150 -65 to+150 C C s pulse width,1% duty cycle 2.Thermal resistance from junction to case JINAN JINGHENG CO., LTD. 100 SRF 1550 I(AV) Operating junction temperature range Notes: 1.Pulse test: 300 SRF 15200 SRF 1545 VRRM VRMS VDC Typical thermal resistance (Note 2) Storage temperature range SRF 15150 SRF 1535 1-120 NO.51 HEPING ROAD JINAN PR CHINA TEL:86-531-86943657 FAX:86-531-86947096 WWW.JIFUSEMICON.COM RATINGS AND CHARACTERISTIC CURVES SRF1535 THRU SRF15200 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 25 175 RESISTIVE OR INDUCTVE LOAD 20 TJ=TJMAX 150 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 15 10 5 0 0 50 100 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 125 100 75 50 25 LEAD TEMPERATURE ( C) 1 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 SR1535 -- SR1545 INSTANTANEOUS REVERSE CURRENT (mA) 10 INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 10 TJ=125 C PULSE WIDTH=300 S 1% DUTY CYCLE TJ=25 C 1 0.1 SR1550 - SR1560 TJ=125 C 1 0.1 TJ=75 C 0.01 SRF1535 -- SRF1545 SRF1550 - SRF15200 0.01 TJ=25 C 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.001 0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 SRF1535 -- SRF1545 SRF1550 - SRF15200 100 40 0.1 1 10 100 10 1 0.1 0.01 100 0.1 1 10 100 T, PULSE DURATION ,sec. REVERSE VOLTAGE. VOLTS 1-121 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD JINAN PR CHINA TEL:86-531-86943657 FAX:86-531-86947096 WWW.JIFUSEMICON.COM