TECHNICAL DATA PNP POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/441 Devices Qualified Level 2N3740 JAN JANTX JANTXV 2N3741 MAXIMUM RATINGS Ratings Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Base Current Collector Current Total Power Dissipation @ TC = +250C (1) @ TC = +1000C Operating & Storage Junction Temperature Range Symbol 2N3740 2N3741 Unit VCEO VCBO VEBO IB IC 60 60 80 80 7.0 2.0 4.0 25 14 -65 to +200 Vdc Vdc Vdc Adc Adc W W 0 C Max. 7.0 Unit 0 C/W PT TJ, Tstg TO-66 (TO-213AA) THERMAL CHARACTERISTICS Characteristics Thermal Resistance, Junction-to-Case 1) Derate linearly @143 mW/0C for TC > +250C Symbol RθJC *See Appendix A for Package Outline ELECTRICAL CHARACTERISTICS (TC = 250C unless otherwise noted) Characteristics Symbol Min. Max. Unit 2N3740 2N3741 V(BR)CEO 60 80 2N3740 2N3741 ICEO 10 10 µAdc 2N3740 2N3741 ICEX 300 300 ηAdc 2N3740 2N3741 ICBO 100 100 ηAdc IEBO 100 ηAdc OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage IC = 100 mAdc Collector-Emitter Cutoff Current VCE = 40 Vdc VCE = 60 Vdc Collector-Emitter Cutoff Current VCE = 60 Vdc, VBE = 1.5 Vdc VCE = 80 Vdc, VBE = 1.5 Vdc Collector-Base Cutoff Current VCB = 60 Vdc VCB = 80 Vdc Emitter-Base Cutoff Current VEB = 7.0 Vdc 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 Vdc 120101 Page 1 of 2 2N3740, 2N3741 JAN SERIES ELECTRICAL CHARACTERISTICS (con’t) Characteristics Symbol Min. Max. Unit ON CHARACTERISTICS (2) Forward-Current Transfer Ratio IC = 100 mAdc, VCE = 1.0 Vdc IC = 250 mAdc, VCE = 1.0 Vdc IC = 500 mAdc, VCE = 1.0 Vdc IC = 1.0 Adc, VCE = 1.0 Vdc IC = 4.0 Adc, VCE = 5.0 Vdc Collector-Emitter Saturation Voltage IC = 250 mAdc, IB = 25 mAdc IC = 1.0 Adc, IB = 125 mAdc Base-Emitter Voltage IC = 250 mAdc, VCE = 1.0 Vdc hFE 40 30 20 10 3.0 120 VCE(sat) 0.4 0.6 Vdc VBE(on) 1.0 Vdc DYNAMIC CHARACTERISTICS Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 100 mAdc, VCE = 10 Vdc, f = 5.0 MHz Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 50 mAdc, VCE = 10 Vdc, f = 1.0 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz hfe hfe 1.0 12 25 250 100 pF on 400 µs off 1.0 µs Cobo SWITCHING CHARACTERISTICS Turn-On Time VCC = 30 Vdc; IC = 1.0 Adc; IB = 0.1 Adc Turn-Off Time VCC = 30 Vdc; IC = 1.0 Adc; IB = IB = 0.1 Adc t t SAFE OPERATING AREA DC Tests TC = +250C, 1 Cycle, t = 1.0 s Test 1 VCE = 6.25 Vdc, IC = 4.0 Adc Test 2 VCE = 20 Vdc, IC = 1.25 Adc Test 3 VCE = 50 Vdc, IC = 150 mAdc 2N3740 VCE = 65 Vdc, IC = 150 mAdc 2N3741 (2) Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%. 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 120101 Page 2 of 2