3.2X1.6mm SMD CHIP LED LAMP Part Number: APC3216CGCK Description Features z3.2X1.6mm SMT LED, 1.1mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS GREEN COMPLIANT. Package Dimensions Notes: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAB4833 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: D.M.LIU PAGE: 1 OF 5 ERP:1203000947 Selection Guide Dice Part No. APC3216CGCK Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaAIP) Viewing Angle [1] Min. Typ. 2 θ 1/2 10 40 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB4833 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: D.M.LIU PAGE: 2 OF 5 ERP:1203000947 Green SPEC NO: DSAB4833 APPROVED: WYNEC APC3216CGCK REV NO: V.5 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: D.M.LIU PAGE: 3 OF 5 ERP:1203000947 APC3216CGCK Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAB4833 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: D.M.LIU PAGE: 4 OF 5 ERP:1203000947 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAB4833 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu APC3216CGCK DATE: APR/18/2007 DRAWN: D.M.LIU PAGE: 5 OF 5 ERP:1203000947