3.5 x2.8mm SMD CHIP LED LAMP Part Number: APED3528SGT SUPER BRIGHT GREEN Description Features zSINGLE The Super Bright Green source color devices are made COLOR. zSUITABLE FOR ALL SMT ASSEMBLY AND SOLDER with Gallium Phosphide Green Light Emitting Diode. PROCESS. zIDEAL FOR BACKLIGHTING. zAVAILABLE ON TAPE AND REEL. zPACKAGE: 500PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1064 REV NO: V.2 DATE: OCT/19/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203003582 Selection Guide Dice Part No. APED3528SGT Iv (mcd) [2] @ 20mA Lens Type SUPER BRIGHT GREEN (GaP) GREEN TRANSPARENT Viewing Angle [1] Min. Typ. 2θ1/2 10 25 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1064 REV NO: V.2 DATE: OCT/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203003582 Super Bright Green APED3528SGT SPEC NO: DSAD1064 REV NO: V.2 DATE: OCT/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203003582 APED3528SGT Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1064 REV NO: V.2 DATE: OCT/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203003582 PACKING & LABEL SPECIFICATIONS APED3528SGT SPEC NO: DSAD1064 REV NO: V.2 DATE: OCT/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203003582