LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only TAPE AND REEL TYPE LED LAMPS Pb Lead-Free Parts LEG42292/L11-PF/TRS-X DATA SHEET DOC. NO : QW0905- LEG42292/L11-PF/TRS-X REV. : A DATE : 24 - Oct. - 2006 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LEG42292/L11-PF/TRS-X Page 1/7 Package Dimensions ΔH P2 H2 W2 H1 L W0 W3 W1 + - + D F G F E P1 1 P 2 3 1.ANODE GREEN 2.COMMON CATHODE 3.ANODE ORANGE T 4.0 3.0 LEG42292/L11-PF 4.2 5.2 6.7±0.5 1.5 MAX G □0.5 TYP 1 2 3 2.0MIN 2.0TYP 1 18.0MIN 2.0MIN E 2 3 1.ANODE GREEN 2.COMMON CATHODE 3.ANODE ORANGE 2.0TYP Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LEG42292/L11-PF/TRS-X Page 2/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT E G Forward Current IF 30 30 mA Peak Forward Current Duty 1/10@10KHz IFP 120 120 mA Power Dissipation PD 100 100 mW Reverse Current @5V Ir 10 μA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO COLOR MATERIAL Emitted Peak wave length λP nm Forward Spectral voltage halfwidth △λ nm @20mA(V) Lens GaAsP/GaP Orange Luminous intensity @ 10mA(mcd) Viewing angle 2θ 1/2 (deg) Min. Max. Min. Typ. 635 45 1.7 2.6 8.0 20 70 565 30 1.7 2.6 8.0 20 70 White Diffused LEG42292/L11-PF/TRS-X GaP Green Note : 1.The forward voltage data did not including ± 0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LEG42292/L11-PF/TRS-X Page 3/7 •Dimensions Symbol Information OPTION SYMBOL CODE SYMBOL ITEMS SPECIFICATIONS Minimum inch mm Maximum inch mm Tape Feed Hole Diameter ------- D 3.8 0.15 4.2 0.17 Component Lead Pitch ------- F 1.7 0.07 2.5 0.10 ------- △H ------- ------- 17.5 21.5 25.5 27.5 22.5 19.9 24.0 24.5 19.0 18.4 21 20.5 18.0 26.5 0.69 0.85 1.0 1.08 0.89 0.78 0.94 0.96 0.75 0.72 0.83 0.81 0.71 1.04 ------- ------- 2.0 18.5 22.5 26.5 28.5 23.5 20.9 25.0 25.5 20.0 19.4 22 21.5 19.0 27.5 36 0.08 0.73 0.89 1.04 1.12 0.93 0.82 0.98 1.0 0.79 0.76 0.87 0.85 0.75 1.08 1.42 11.0 0.43 Front-To-Rear Deflection TRS-1 TRS-2 TRS-3 TRS-4 TRS-5 TRS-6 TRS-7 TRS-8 TRS-9 TRS-10 TRS-11 TRS-12 TRS-13 TRS-14 Feed Hole To Bottom Of Component Feed Hole To Overall Component Height H1 ------- H2 Lead Length After Component Height ------- L Feed Hole Pitch ------- P 12.4 0.49 13.0 0.51 Lead Location ------- P1 4.4 0.17 5.8 0.23 Center Of Component Location ------- P2 5.1 0.2 7.7 0.3 Overall Taped Package Thickness ------- T ------- ------- 1.42 0.06 Feed Hole Location ------- W0 8.5 0.33 9.75 0.38 Adhesive Tape Width ------- W1 14.5 0.57 15.5 0.61 Adhesive Tape Position ------- W2 0 0 4.0 0.16 Tape Width ------- W3 17.5 0.69 19.0 0.75 W0 REMARK:TRS=Tape And Reel Straight Leads • Dimensions Symbol Information • Package Dimensions Specification Description Symbol minimum mm inch maxmum inch mm Reel Diameter D 78.2 3.08 380 14.96 Core Diameter D1 34.9 1.37 102 4.02 Hub Recess Inside Diameter D2 28.6 1.13 88.0 3.46 Arbor Hole Diameter D3 13.8 0.54 38.1 1.5 Overall Reel Thickness T2 57.2 2.25 Iside Reel Flange Thickness T1 50.0 1.97 Quantity/Reel 30.0 1.18 2000PCS D3 MARKING D2 D1 T1 T2 D LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LEG42292/L11-PF/TRS-X Page 4/7 Typical Electro-Optical Characteristics Curve E CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.0 2.0 3.0 4.0 5.0 1.0 10 1.2 1.1 1.0 0.9 0.8 0 20 40 60 80 100 Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0.0 550 600 650 700 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 Ambient Temperature( ℃) Ambient Temperature( ℃) Relative Intensity@20mA Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature -20 1000 Forward Current(mA) Forward Voltage(V) -40 100 750 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/7 PART NO.LEG42292/L11-PF/TRS-X Typical Electro-Optical Characteristics Curve G CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.5 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 2.0 1.0 3.0 4.0 5.0 1.0 10 1.2 1.1 1.0 0.9 0.8 0 20 40 60 80 100 Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0.0 500 550 600 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 Ambient Temperature( ℃) Ambient Temperature( ℃) Relative Intensity@20mA Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature -20 1000 Forward Current(mA) Forward Voltage(V) -40 100 650 80 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LEG42292/L11-PF/TRS-X Page 6/7 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2° C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) Temp(° C) 260° C3sec Max 260° 5° /sec max 120° 25° 0° 0 2° /sec max Preheat 50 100 60 Seconds Max Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 150 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/7 PART NO.LEG42292/L11-PF/TRS-X Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hours. 1.Ta=105 ℃±5℃&-40 ℃±5℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5 ℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5 ℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11