LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only HIGH VOLTAGE LED LAMPS Pb Lead-Free Parts LG2040/HV12-O-W54 DATA SHEET DOC. NO : QW0905-LG2040/HV12-O-W54 REV. : A DATE : 26 - Dec. - 2006 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LG2040/HV12-O-W54 Package Dimension 3.0 4.0 4.2 5.2 Page 1/2 Directivity Radiation +Vcc 0° Vcc=12Volts □0.5 TYP IF 17.0±0.5 -30 ° RL=1200ohms ±20% RL 25.0MIN -60 ° 78.0±2.0 VF Pyrocondensation Cannula 30 ° 60° IF= Vcc-VF RL 100% 75% 50% 25% 0 25% 50% 75% 100% 3.0 + - Note:1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted 2.Specifications are subject to change without notice •Part Selection And Application Information (Ratings At 25℃ Ambient) PART NO MATERIAL COLOR Emitted LG2040/HV12-O-W54 GaP Green Peak wave length λPnm Spectral halfwidth △λnm Lens Green Diffused 565 30 Forward current (mA) @12V Luminous lntensity (mcd) @12V Reverse current (μA) VR=15V Min. Max. Min. Typ. Max. 6.0 100 12 8.0 20 Viewing angle 2θ1/2 (deg) 36 •Absolute Maximum Rating (Ta=25℃) GREEN UNIT PARAMETER G Forward voltage 12 V Reverse voltage 15 V Operating Temperature Storage Temperature -40℃ TO +85℃ -40℃ TO +100 ℃ Lead Soldering Temperature 260℃ For 5 Seconds(2.0mm From Body) REMARK LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/2 PART NO. LG2040/HV12-O-W54 Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hours. Thermal Shock Test 1.Ta=105 ℃±5℃ &-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11