LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PLCC-4 TOPLED Pb Lead-Free Parts LUY9553-4H/TR1 DATA SHEET DOC. NO REV. DATE : : QW0905-LUY9553-4H/TR1-B03 A : 08 - Sep. - 2008 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/7 PART NO. LUY9553-4H/TR1 Features *package : 12mm tape on 7" diameter reels. *feature of the device:more light due to higher optical efficiency,higher ambient temperature at the same current possible compared to TOPLED *assembly methods:suitabl for all SMT assembly methods *ESD-withstand voltage:up to 2kv acc. to JESD22-A114-B Applications *traffic lights *backlighting(LCD,switches,keys,displays,illuminated advertising) *interior and exterior automotive lighting(e.g.dashboard backlighting,turn signal lamps,sidemarkers, brake lights) *substitution of micro incandescent lamps *marker lights(e.g.exit ways,etc.) *signal and symbol luminaire Package Dimensions 1.85(.073) 2.8(.11) 2 0.7 (.028) 3 3 2 0.7 (.028) 0.9(.035) 3.5 (.138) 3.2(.126) 0.9(.035) 1 CATHODE 4 4 0.5(.020) 2.2(.106) 2.2 (.106) 1 2 3 1 4 0.95(.037) Note : 1.All dimension are in millimeter tolerance is ± 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4H/TR1 Page 2/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT UY(H) Forward Current IF 70 mA Peak Forward Current (1/10 Duty cycle,0.1ms Pulse Width) IFP 100 mA Power Dissipation PD 200 mW Reverse Current @5V Ir 10 μA Electrostatic Discharge ESD 2000 V Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +100 ℃ IR-Reflow Profile for lead free soldering(Acc.to J-STD-020B) 300 255°C 240°C 250 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile +0 °C 260°C -5°C 245°C ±5°C +5 °C 235°C -0°C 217°C 200 10 s min Ramp Down 3k/s(max) 30 s max 150 100 s max 120 s max 100 Ramp Up 3k/s(max) 50 25°C 0 0 50 100 150 200 t 250 300 s LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/7 PART NO. LUY9553-4H/TR1 Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO LUY9553-4H/TR1 COLOR MATERIAL AlGaInP/GaP Emitted Lens Yellow Water Clear Dominant wave length λDnm Spectral halfwidth △λnm Forward voltage @50mA(V) Luminous intensity @50mA(mcd) Min. Max. Min. Typ. 590 20 1.7 2.8 500 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Recommended Solder Pad useable for PLCC-4 TOPLED 2.6(.102) 0.4 (.016) 4.5 (.177) Viewing angle 2 θ 1/2 (deg) 1.5(.059) 800 120 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page4/7 PART NO. LUY9553-4H/TR1 Typical Electro-Optical Characteristics Curve UY(H) CHIP Fig.1 Forward Current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 2.0 1.0 3.0 4.0 5.0 1.0 10 Fig.3 Forward Voltage vs. Temperature Fig.4 Relative Intensity vs. Temperature 3.0 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Relative Intensity@20mA Normalize @25℃ 1.2 Forward Voltage@20mA Normalize @25℃ 1000 Forward Current(mA) Forward Voltage(V) 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA 100 Fig.6 Directivity Radiation 0° 1.0 -30° 30° -60° 0.5 100% 75% 50% 0.0 500 550 600 Wavelength (nm) 650 60° 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4H/TR1 Page 5/7 Reel Dimensions 16.0± 1.0 ψ178±2.0 14.2±1.0 74.0±1.5 Carrier Type Dimensions 4.0 2.0 0.23 1.55 1.75 Cathode Marking 5.5 12.0±0.3 4.06 9.3 4.0 3.12 2.24 Part No. Description Quantity/Reel LUY9553-4H/TR1 12.0mm tape,7"reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4H/TR1 Page 6/7 Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below Circuit model A LED Circuit model B LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4H/TR1 Page 7/7 Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=50mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=1 00 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs Endurance Test Thermal Shock Test Solderability Test Temperature Cycling 1.Ta=105 ℃±5℃&-40 ℃±5℃ (30min) (30min) 2.total 100 cycles 1.T.Sol=235 ℃±5 ℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 1.105 ℃ ~ 25 ℃ ~ -55 ℃ ~ 25 ℃ 30mins 5mins 30mins 5mins 2.10 Cyeles MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 Ramp-up rate(217℃ to Peak) +3℃ second max Temp. maintain at 175( ±25)℃ 180 seconds max Temp. maintain above 217℃ 60-150 seconds Peak temperature range 260℃+5/-0℃ Time within 5℃ of actual Peak Temperature(tp) 10-30 seconds Ramp-down rate +6 ℃/second max MIL-STD-750D:2031.2 J-STD-020B Environmental Test IR Reflow MIL-STD-202F:103B JIS C 7021: B-11