LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PLCC-4 TOPLED Pb Lead-Free Parts LUYOS9553-4/TR1 DATA SHEET DOC. NO REV. DATE : QW0905-LUYOS9553-4/TR1-B01 : A : 10 - Oct. - 2008 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUYOS9553-4/TR1 Page 1/7 Features *package : 12mm tape on 7" diameter reels. *feature of the device:more light due to higher optical efficiency,higher ambient temperature at the same current possible compared to TOPLED *assembly methods:suitabl for all SMT assembly methods *ESD-withstand voltage:up to 2kv acc. to JESD22-A114-B Applications *traffic lights *backlighting(LCD,switches,keys,displays,illuminated advertising) *interior and exterior automotive lighting(e.g.dashboard backlighting,turn signal lamps,sidemarkers, brake lights) *substitution of micro incandescent lamps *marker lights(e.g.exit ways,etc.) *signal and symbol luminaire Package Dimensions 1.85(.073) 2.8(.11) 2 0.7 (.028) 3 3 2 0.7 (.028) 0.9(.035) 3.5 (.138) 3.2(.126) 0.9(.035) 1 ANODE 4 4 0.5(.020) 2.2(.106) 2.2 (.106) 2 3 1 4 0.95(.037) Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 1 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUYOS9553-4/TR1 Page 2/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT UYOS Forward Current IF 70 mA Peak Forward Current (1/10 Duty cycle,0.1ms Pulse Width) IFP 100 mA Power Dissipation PD 200 mW Reverse Current @5V Ir 10 μA Electrostatic Discharge ESD 2000 V Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +100 ℃ IR-Reflow Profile for lead free soldering(Acc.to J-STD-020B) 300 255°C 240°C 250 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile +0°C 260°C -5°C 245°C ±5°C +5°C 235°C -0°C 217°C 200 10 s min Ramp Down 3k/s(max) 30 s max 150 100 s max 120 s max 100 Ramp Up 3k/s(max) 50 25°C 0 0 50 100 150 200 t 250 300 s LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUYOS9553-4/TR1 Page 3/7 Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO LUYOS9553-4/TR1 COLOR MATERIAL InGaAlP Emitted Lens Yellow Water Clear Dominant wave length λDnm Spectral halfwidth △λnm Forward voltage @50mA(V) Luminous intensity @50mA(mcd) Min. Max. Min. Typ. 592 15 1.7 2.8 800 1250 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Recommended Solder Pad useable for PLCC-4 TOPLED 2.6(.102) 0.4 (.016) 4.5 (.177) Viewing angle 2θ 1/2 (deg) 1.5(.059) 120 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUYOS9553-4/TR1 Page 4/7 Typical Electro-Optical Characteristics Curve UYOS CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 70 50 30 10 2.5 2.0 1.5 1.0 0 1.8 2.0 2.2 0 2.6 2.4 10 20 30 40 50 60 70 Forward Current(mA) Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ 0.00 -0.01 -0.02 -0.03 -0.04 -0.05 -0.06 -0.07 -0.08 -0.09 20 30 40 50 60 70 80 1.0 0.95 0.90 0.85 90 20 Relative Intensity@20mA Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0.0 550 600 Wavelength (nm) 40 50 60 70 Ambient Temperature( ℃) Ambient Temperature( ℃) 500 30 650 80 90 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUYOS9553-4/TR1 Page 5/7 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2± 1.0 74.0±1.5 Carrier Type Dimensions 4.0 2.0 0.23 1.55 1.75 2 3 5.5 12.0±0.3 4.06 9.3 1 4 4.0 3.12 2.24 Polarity Part No. Description Quantity/Reel LUYOS9553-4/TR1 12.0mm tape,7"reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/7 PART NO. LUYOS9553-4/TR1 Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below Circuit model A LED Circuit model B LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUYOS9553-4/TR1 Page 7/7 Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=50mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=1 00 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs Endurance Test Thermal Shock Test Solderability Test Temperature Cycling 1.Ta=105 ℃±5℃&-40 ℃±5℃ (30min) (30min) 2.total 100 cycles 1.T.Sol=235 ℃±5 ℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 1.105 ℃ ~ 25 ℃ ~ -55 ℃ ~ 25 ℃ 30mins 5mins 30mins 5mins 2.10 Cyeles MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 Ramp-up rate(217℃ to Peak) +3℃ second max Temp. maintain at 175( ±25)℃ 180 seconds max Temp. maintain above 217℃ 60-150 seconds Peak temperature range 260℃+5/-0℃ Time within 5℃ of actual Peak Temperature(tp) 10-30 seconds Ramp-down rate +6 ℃/second max MIL-STD-750D:2031.2 J-STD-020B Environmental Test IR Reflow MIL-STD-202F:103B JIS C 7021: B-11