LUMINIS APS1

APC1
SPARTACUS
Attachment accessories
L U M IN I S
General note:
SPT20-SPT25 and SPT50 are
designed as luminaire modules
adaptable to various
installation requirements as a
pole ceiling or wall mount.
Please specify the selected
36” type of attachment with model
number.
(Refer to page 116 for
additional pole mounting
information.)
APS1
APA1
36”
18”
18”
Typical luminaire
-T1
-S
Wall mount
Ceiling suspension
adaptor.
-W1
P
Wall mount
shepherd
arm
36”
Pole mount
curved arm
18”
3”
4 5/8”
5 5/8”
Typical luminaire
5 1/8”
Typical luminaire
ACA5
ACW5
ACA5
Side pole mount extender
ACW5
Wall mount extender
25 1/2”
Power supply
30”
Front view
Typical luminaire
17 3/4”
ACA5 -EPA: 0.8
1” X 3” extruded aluminum side pole arm mount. 4” O.D X 30” lg.
post top adaptor with a cast aluminum tenon to fit with a 3 3/4” I.D.
pole. 1/2” dia. stainless steel rod support. Extruded arm and all
other parts are painted same color as Luminaire.
ACW5- Wall mount version with independent cast aluminum
mounting plates.
BI-LEVEL MOUNTING
Option: BL
Twin mount off set
luminaire installation.
APC1 -EPA: 0.12
1” X 3” extruded aluminum side pole mounting adaptor.
“X”
Dimension
APA1 - EPA: 0.2
1 5/8” dia. aluminum shepherd style arm, with two extruded 1”X 3”
aluminum side pole adaptor.
(P) Position: 180º
Step1:
Select distance between
luminaires as shown(X”)
APS1 - EPA: 0.15
1 5/8” dia. aluminum shepherd style arm, with two extruded 1”X 3”
aluminum pole adaptor.
1) BL (“x”)
Step2:
Indicate position of
luminaires at 90º or 180º
-S
15º swivel ceiling mount with 5/8” dia.X36”lg aluminum stem. luminaire
top adaptor allowing to cut stem to length on site.
(Mounts over a standard 4" octagonal box with 3 1/2" C/C holes)
2) (P)-Position
EX: SPT20-BL36-90
-T1 -1” x 3” extruded aluminum wall mounting straight adaptor with cast
aluminum cover and galvanized steel mounting plate.
(P) Position: 90º
Important: consider Additional pole lenght required for BL set
mounting.
Spartacus SPT20 and SPT25 series may be installed in several
positions along the pole. Please provide information with
desired position as shown above.
-W1 -1 5/8” Dia. shepherd aluminum arm wall mount, with a cast
aluminum wall cover and galvanized steel mounting plate.
-P - Cast aluminum elliptical curved arm. Refer to corresponding
luminaire specification sheet SPT20 & SPT25 for details.
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 115
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007