AR10W . AR10W-UP . AR10WL 1 2 Specification All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. 3 4 5 - Pulse rated medium base porcelain socket. - 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 6 7 8 9 Hinged frame For pole mounting, please refer to page 22 11 1/2” 7 1/2” AR10W-UP: 21” 17 1/2” 19 1/2” AR10WL Argon with conical lens 1 - 11 ga. galvanized pressure mounting plate. 2 - Cast aluminum isolated ballast compartment. 3 - Solid aluminum top cone 4 - Tempered clear glass for reflected light glow. 5 - Standard semi-specular type V distribution reflector. 6 - Cone shaped heavy duty aluminum housing. 7 - Cast aluminum sealed hinged glass lens frame, with perimeter memory retention embedded silicone gasket . 8 - Stainless steel recessed captive hexagonal cap screws. 9 - Tempered clear glass lens. AR10W: AR10WL: 13 1/2” 13 1/2” ASH: Optional 20”ø shade. Adaptable to AR10W & AR10WL ASH: AR10W-UP Max: 100W 5 1/8” AR10W Argon with flat lens Certification UL. Wet Location. Model# Regressed clear tempered glass lens. White translucent acrylic frosted conical dropped lens. Down light only. (Up light model with additional flush mount protection clear lens) Low brightness full cut-off 20”ø aluminum shade. Compatible with AR10W-AR10WL Photometry 3 1/2” Mounting & E.P.A. 90 Max.weight: 22 lbs. EPA: 0.65 Installation: Mounts over a standard 4” octagonal electrical box with 3 1/2” c/c mounting holes. (by others ) additional separate mounting holes are provided with wall plate. Light source selection MH (ED17) M70 M100 M150 M175 AR10W *AR10WL *AR10W-UP ARGON Wall mount L U M IN I S HPS (ED17) H70 H100 H150 CF (Gx24q) Single lamp F157 F170 CF (Gx24q) Two lamp F226 F232 F242 * AR10WL: Max. 150W AR10W-UP: Max.100W Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. 60 30 Voltage Finish 120 V Standard factory (Refer to color chart) prewired Standard selection (If no voltage is specified) WHT:Snow white For other voltages, please specify with catalog number. BKT: Jet black BZT: Bronze H.I.D. GRT: Titanium gray 208 V DGT: Gun metal Note: 50W.HPS 240 V is available with CHT: Champagne 277 V 120/277V only. MST: Matte silver 347 V GNT: Forest green Optional colors CS: Custom color COMP. FLUO. RAL: RAL# color Smart ballast 120/277 347 V (To specify) (Lamps by others) luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 For options details and specifications, please refer to pages 22 - 41 Options Accessories ASH: CP: RA3: RA4: Electrical FS: PH1: PH2: EM42S: Fuse 120/277V photo cell 347V photo cell 1 lamp (26/32/42W) EM battery. Note: EM optional battery test switch and pilot lamp are installed remotely. (See page 72) Available for wall mounted luminaires only Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 19 20” dia. alum. shade. Pole mounting adaptor. See page 22 Type III semi specular reflector. (Single lamps only.) Forward Throw type IV distribution Web: www.luminis.com Sept.2006 Rev: Feb.2007 L U M IN I S ARGON Pole mount attachments Argon with flat lens Argon with conical lens Argon with lens/shade combination With top glow ring 5” 2 5/8” 2 5/8” 23” 21 1/2” AR10-CP AR10L-CP With top glow ring With top glow ring AR10-ASH-CP (With flat lens & shade.) AR10WL-ASH-CP (With conical lens & shade.) Pole adaptor is factory designed and made to fit with 4” or 5” dia. pole. Please refer to page 145 for additional details. With Closed top AR12-CP With Closed top AR12L-CP AR12-ASH-CP With Closed top (With flat lens & shade.) AR12L-ASH-CP (With conical lens & shade.) White translucent diffuser. AR15-CP AR15L-CP White translucent diffuser. White translucent diffuser. AR15-ASH-CP (With flat lens & shade.) AR15L-ASH-CP (With conical lens & shade.) Mounting: General notes : Installation: Connects to a standard 4” or 5” O.Dia. x .125” thick wall pole Please refer to corresponding specification sheet for desired luminaire detail. RA3 and RA4 Options are available with a single lamp installation AR10-CP AR12-CP AR15-CP EPA .93 AR10L-CP AR12L-CP AR15L-CP .95 AR10-ASH-CP AR12-ASH-CP AR15-ASH-CP .95 AR10L-ASH-CP AR12L-ASH-CP AR15L-ASH-CP 1.27 Compatible poles listing. 4”O.D. 5”O.D. 4”O.D. PAA410-CP PAA510-CP PXD10-CP PAA412-CP PAA512-CP PXD12-CP PAA414-CP PAA514-CP PXD14-CP PAA416-CP PAA516-CP PXD16-CP PAA418-CP PAA518-CP PXD18-CP PAA420-CP PAA520-CP PXD20-CP For poles details and specification, please refer to pages 140 to 144 Pole height 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 22 Web: www.luminis.com Sept.2006 Rev: Feb.2007