LUXOR Wall surface mount L U M I N IS 1 2 3 All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. 4 5 Alternate on site mounting configuration - Pulse rated medium base porcelain socket. - 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. - Cast aluminum swing out hinge mechanism for quick maintenance access. 1 - Cast aluminum isolated ballast compartment 2 - 1/2” aluminum solid stand off rods. 3 - One piece copper free cast aluminum pyramid housing available with closed or open luminous faces. 4 - Heavy wall borosilicate frosted glass diffuser with inner linear prismatic pattern for structural reinforcement. 5 - White translucent high impact frosted acrylic triangular lens diffuser. 6 - Stainless steel captive hexagonal cap screws . 19 1/2” 7 LX135: LX138: LX139: 14 1/2” 3 1/2” LX135 . LX138 . LX139 Specification Enclosed pyramid front housing with back light wall washer. Pyramid front housing with triangular triple openings and back light wall washer. Pyramid front housing with triangular quad openings and back light wall washer. 14” Photometry LX135 LX138 90 LX139 Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. 60 Certification UL. Wet Location. Model# Mounting Max.weight: 29 lbs. Installation: Mounts over a standard 4” octagonal electrical box with 3 1/2” c/c mounting holes. (by others ) additional separate mounting holes are provided with wall plate. Light source selection MH (ED17) M70 M100 M150 M175 LX135 LX138 LX139 30 HPS (ED17) H70 H100 H150 CF (Gx24q) Single lamp F132 F142 F157 F170 CF (Gx24q) Two lamp F226 F232 F242 (Lamps by others) Voltage For options details and specifications, please refer to pages 72. Finish 120 V Standard factory (Refer to color chart) prewired Standard selection (If no voltage is specified) WHT:Snow white For other voltages, please specify with catalog number. BKT: Jet black BZT: Bronze H.I.D. GRT: Titanium gray 208 V DGT: Gun metal 240 V CHT: Champagne 277 V MST: Matte silver 347 V GNT: Forest green Optional colors CS: Custom color COMP. FLUO. RAL: RAL# color Smart ballast 120/277 Options Electrical FS: Fuse EM42S: 1 lamp (26/32/42W) EM battery. PH1: 120/277V photo cell PH2: 347V photo cell Note: EM optional battery test switch and pilot lamp are installed remotely. (Refer to page 72) 347 V (To specify) luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 50 Web: www.luminis.com Sept. 2006 Rev: Feb.2007 L U M I N IS OPTIONAL MOUNTING AND ACCESSORIES 3” Front view A 4 5/8” 1/2” dia. natural stainless steel rod support Mounting plate A 17 3/4” 17 3/4” 22” 6 3/8” 45º B Tubular ballast enclosure with removable access bottom cover ACW2 Wall mount 5 5/8” 5 1/8” LUXOR Mounting plate B 12 1/4” 6 1/4” Max weight: (luminaire included) H.I.D: 38 lbs. C.F.: 29 lbs 33” Power supply LX120-ACW2 Compact fluorescent LX124-ACW2 H.I.D Extruded aluminum wall mounted adaptor . 5” dia.x 12 3/4” lg. tubular ballast enclosure with removable cover for access to ballast tray. Cast aluminum wall mounted plate. 1/2” dia.stainless steel rod support. Extruded arm and all other parts are painted same color as luminaire . 33” Front view 8” 1/2” dia. natural stainless steel rod support 22” 45 deg. LX150-PC LX150-PH E.P.A.: .74 Extruded aluminum side pole mounting adaptor. 2” X 4” Extruded arm and all other parts are painted same color as luminaire.. LX120-ACA2 Compact fluorescent LX124-ACA2 H.I.D E.P.A.: 2.0 Extruded aluminum side pole mounting adaptor. 1/2” dia. stainless steel natural rod support. Extruded arm and all other parts are painted same color as luminaire. * Note: 36” extension with ACA2 attachment 24” extension with LX150PC / LX150PH attachment OAL pole height Mounting 12-14 or 16ft. style * Note PXD pole style PCA pole style PAA pole style Compact fluorescent H.I.D Compatible poles listing. Post side mount for LX150PH (For Luxor HID.) Post side mount for LX150PC (For Luxor Compact Fluoresecnt.) 4”O.D. 5”O.D. PAA410-APC PAA412-APC PAA414-APC PAA416-APC PAA418-APC PAA420-APC PAA510-APC PAA512-APC PAA514-APC PAA516-APC PAA518-APC PAA520-APC 4”O.D. PCA12-APC PCA14-APC PCA16-APC 4”O.D. PXD10-APC PXD12-APC PXD14-APC PXD16-APC PXD18-APC PXD20-APC 5”O.D. PAA510-APC PAA512-APC PAA514-APC PAA516-APC PAA518-APC PAA520-APC Pole height 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft Post side mount with ACA2 attachment accessory Post top mounting for LX120-ACA2 and LX124-ACA2 Mounting style PAA514-ACA PAA516-ACA PAA518-ACA PAA520-ACA 60” 14 ft 16 ft 18 ft 20 ft For poles details and specification, please refer to pages 140 to 144 luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 54 Web: www.luminis.com Sept. 2006 Rev: Feb.2007