LUMINIS SR420CD

L U M I N IS
SCIROCCO
Ceiling surface mounting
Specification
SR400CD. SR410CD. SR420CD
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content. #356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1
2
1- Cast aluminum ballast housing, with built-in hinge mechanism.
2- Set of two cast aluminum clamp retainers.
3- SR400CD: White translucent acrylic diffuser 4” X 12” dia.
SR410CD: Solid aluminum light shield.
SR420CD: perforated aluminum light shield.
4- Thermal shock and heat resistant borosilicate frosted
heavy glass diffuser, with a prismatic linear inner glass structure.
5- One piece cast aluminum star ribbed cage
3
4
5
7 1/2”
Photometry
SR400CD
17”
SR410CD
90
12”
60
SR420CD
20”
30
Certification
Weight & EPA
E.T.L Damp location
Model#
E.P.A: 0.8 sq./ft
Light source selection
MH (ED17)
SR400CD
SR410CD
SR420CD
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
www.luminis.com.
M50
M70
HPS (ED17)
H50
H70
CF (Gx24q)
Single lamp
F132
F142
F157
CF (Gx24q)
Two lamp
F226
F232
F242
Max. weight: 18 lbs..
Finish
Voltage
120 V Standard factory
prewired (If no voltage
is specified)
For other voltages,
please specify with
catalog number.
H.I.D.
208 V
240 V
277 V
347 V
Note:
50W.HPS
is available
with
120/277V
only.
Compact fluorescent
smart ballast 120/277
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
Please refer to page103 for
additional details.
Options
Accessories
High impact diffuser.
Max.50W
Electrical
EM42S: 1 lamp (26/32/42W)
FS:
Fuse
QS:
Standby lamp socket.
QRS:
H.I.D. lamp restrike
PC5:
Note: EM optional battery test
switch and pilot lamp are installed
remotely. (See page 103)
347 V (To specify)
(Lamps by others)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 94
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
L U M IN I S
MOUNTING ACCESSORIES
Pole mount
SR100
SCIROCCO
Wall mount
APC
T
Side pole
mount.
Wall mount.
SR150
SR200
ACA3
ACW3
Side pole
mount.
Wall mount.
SR300
APA
Side pole
mount.
SR340
SR350
W
WA
Wall mount.
Except
SR600 series
Wall mount
SR600 series.
Ceiling mount
APS
Post top
S
SR400
Ceiling stem
mount.
SR400SD
Compatible poles listing.
Post side mount with APA attachment accessory
Mounting
style
SR600
* Note:
36” extension with ACA3 attachment
24” extension with APC & APA attachment
APA
OAL pole height
12-14 or 16ft.
PCA
pole
style
5”O.D.
PAA510-APA
PAA512-APA
PAA514-APA
PAA516-APA
PAA518-APA
PAA520-APA
4”O.D.
PCA12-APA
PCA14-APA
PCA16-APA
4”O.D.
PXD10-APA
PXD12-APA
PXD14-APA
PXD16-APA
PXD18-APA
PXD20-APA
Pole
height
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with APC attachment accessory
APC
PCA
pole
style
PAA410-APA
PAA412-APA
PAA414-APA
PAA416-APA
PAA418-APA
PAA420-APA
PAA410-APC
PAA412-APC
PAA414-APC
PAA416-APC
PAA418-APC
PAA420-APC
* Note
PXD
pole
style
4”O.D.
PAA
pole
style
PAA510-APC
PAA512-APC
PAA514-APC
PAA516-APC
PAA518-APC
PAA520-APC
PCA12-APC
PCA14-APC
PCA16-APC
PXD10-APC
PXD12-APC
PXD14-APC
PXD16-APC
PXD18-APC
PXD20-APC
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with APS attachment accessory
PAA410-A
PAA412-A
PAA414-A
PAA416-A
PAA418-A
PAA420-A
APS
60”
PAA510-A1
PAA512-A1
PAA514-A1
PAA516-A1
PAA518-A1
PAA520-A1
PCA10-A
PCA12-A
PCA14-A
PCA16-A
PXD10-A
PXD12-A
PXD14-A
PXD16-A
PXD18-A
PXD20-A
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with ACA3 attachment accessory
PAA414-ACA PAA514-ACA PCA14-ACA
PXD14-ACA
14 ft
PAA416-ACA PAA516-ACA PCA16-ACA
PXD16-ACA
16 ft
PAA418-ACA PAA518-ACA
PXD18-ACA
18 ft
PAA420-ACA PAA520-ACA
PXD20-ACA
20 ft
For poles details and specification, please refer to pages 140 to 144
ACA3
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 101
Web: www.luminis.com
June.2007
L U M IN I S
MOUNTING ACCESSORIES
36”
SCIROCCO
7”
14”
23”
28 1/2”
5”
SR600
Series
15”
16”
SR600
15”
Series
0”
-S
W -1 5/8” Dia. shepherd aluminum
APA -1 5/8” Dia. shepherd
APS -1 5/8” Dia. shepherd
15º swivel ceiling mount with 1/2”
dia.X36”lg aluminum stem.
luminaire top adaptor allowing to
cut stem to length on site.(Mounts
over a standard 4" octagonal box
with 3 1/2" C/C holes)
arm wall mount, with a cast
aluminum wall cover and
galvanized steel mounting plate.
WA- For SR600 series with double
wall cast mounting plate
aluminum side pole mount.
(EPA: 0.15)
aluminum post top mount, with a
cast aluminum tenon to fit with
a 3 3/4” I.D. pole.
(EPA: 0.15)
29”
E
4 1/2”
4”
32”
17 3/4”
SR600
Series
36 ”
3”
Power supply
11”
Power supply
4 5/8”
5 5/8”
SR600
Series=36 ”
5 1/8”
ACA3 -1” x 3” extruded aluminum Davit arm pole
ACW3 -1” x 3” extruded aluminum Davit arm wall
T -1” x 3” extruded aluminum wall
mounting adaptor designed to fit with 4 to 5” dia.
poles.1/2” dia.X 45º standard natural stainless steel
rod support.
(EPA: 0.7)
mounting adaptor with cast aluminum covers and
galvanized steel mounting plates. 1/2” dia.X 45º
standard natural stainless steel rod support.
mounting straight adaptor with cast
aluminum cover and galvanized
steel mounting plate.
OptIon “T ”
OptIon “APC ”
E
F
SR100
SR150
SR200
SR350
22 1/2”
21 1/2”
SR300
17”
16”
24 1/2”
23 1/2”
18 1/2”
18 1/2”
25”
24”
F
SR400SD
SR410SD
SR400
SR410
SR600
APC -1” x 3” extruded
aluminum side pole mounting
straight adaptor (EPA: 0.12)
Above listed dimensions may vary upon minor
design changes. For critical conditions, please
consult factory.
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 102
Web: www.luminis.com
June.2007
L U M IN I S
MOUNTING ACCESSORIES
SCIROCCO
Please specify selected option as a suffix to the specified model number. Some options may not be compatible when used in the
same luminaire. This information is indicated when it is applicable.
Slope ceiling adaptor
Longer suspension stem
STM80
45º hang straight ball swivel
for 5/8” dia. suspension stem.
Stems can be cut on site
and rethreaded externally
(Tap size 1/4-18)
SW45
Suspension power cord
Safety suspension cable
Option: TCW (White)
TCB (Black)
3/18 X 36”lg. power cord with
adjustable aircraft cable.
SPB Black power cable only
with options
EM42 / EM42S
QS / DS/ DS2
3/18 Spiral power cord Max.
277V Standard extended
length: 3ft.
Not applicable when
using options
EM42 / EM42S
QS / DS/ DS2
Pier mount adaptor
Safety aircraft
suspension cable, for
applications with
earthquake regulations.
Cables extends 18”
beyond canopy.
(Secured to building
structure)
Options :
Option: PC5
High impact white
translucent U.V.
stabilized acrylic diffuser.
Max. 50W H.I.D.
or 2x32w C.F.L
Light photo sensor
Quartz restrike
standby lamp kit
max.100W DC
bayonet type
Emergency battery pack
For 57w & 70w: Consult factory
Option:
EM42
PH1 -120V
PH2 - 277 / 347V
PH1 & PH2 Photo electric sensors, are installed with
luminaire when specified with C.F.L. sources.
For H.I.D sources PH1 or PH2 are installed with pole only.
(see options APA/APS/ACA3/APC)
Fuse
Quartz lamp restrike
Option: QS
One lamp:
Option
One lamp:
26w: 450 Lmns..
32w: 575 Lmns.
42w: 750 Lmns.
For SR700
series only
Please refer to page 16 for
more details
Note: FS option fuse is factory
calibrated and installed with
selected wattage.
FS
Ballast protection fuse
Available with H.I.D.
Post mount luminaires:
luminaires only
FS installed with pole.
Quartz lamp socket for external 120V
emergency power input.
Separate 120V dedicated wiring is included.
max.100 W DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Emergency battery back-up
EM42 / EM42S
One piece solid aluminum
reflector hood.All painted same
color as luminaire.
Replaces slotted standard hood.
Add selected suffix to catalog number
Pier mount or short wall
perimeter mounting
adaptor plate.
Fits with SR500 series
Option: QRS
Aluminum hood
Option: FH
Impact resistant diffuser
Option: PM
Quartz lamp restrike
For other factory cut to size length add
suffix -STM with desired length to
catalog# max.120”
Spiral power cord
Option: SPW (White)
SPB (Black)
Option: STC
36” lg.X5/8” O.D.
suspension stem.
60” lg.X5/8” O.D.
suspension stem.
80” lg. X5/8” O.D.
suspension stem.
STM60
Option: SW45
Note: cable size
and type may
change at factory
discretion upon
availability, to
accommodate
required wiring
with selected
option.
Option
All other types:
FS is installed with luminaire.
EM42 wiring
HOT
BLK
WHT
26w: 450 Lmns.. Time: 90 Mnts EM Ballast wiring
32w: 575 Lmns.
120/277V / T 0º C
diagram for 120V
42w: 750 Lmns.
factory connection.
Note: Use of Emergency battery, requires periodic
and regular testing to ensure correct operation.
(please refer to manufacturer’s instructions.
COM
AC ballast
Note:
EM42 option is supplied
with integral test switch and
pilot light.
EM
ballast
EM42S is supplied with
additional wiring for
external remotely installed
test switch and pilot light.
EM42S wiring
WHT
Black/120V (Factory wired)
Orange/277V
(Cap unused lead.)
For 57w & 70w:
(Remote installation only) Consult factory
Please refer to luminaire
specification sheet option
listing.
Single pole test switch (Breaking the connection)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 103
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007