L U M IN I S ECLIPSE Post top mount W768 . W770 Specification All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Painted luminaire base assembly is built with a hinge 1 textured white The mechanism,allowing to tilt the top part of the luminaire to access the on both sides. electrical equipment. No tools required. The quick disconnect ballast assembly is installed on a removable tray. The lamp is 2 accessible with a twist and lock action. The ease of maintenance and lamp replacement concept will leave the optical chamber free of finger prints and foreign particles, Finish: All polyester powder baked coatings preceded with a 5 baths 3 7 preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Pulse rated medium base porcelain socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 4 5 1- W768/W770 : 3/16” thick aluminum reflector disc. Painted textured white on both sides. Optional white enamel over reflective surface, and same color as luminaire on opposite side. 2- 1/4’ thick cast aluminum open twin structural reflector disc support. 3- Clear tempered glass factory sealed lens. 4- Cast Aluminum built-in hinge mechanism with spring loaded push button. 5- Cast Aluminum ballast housing with dissipation fins to maximize heat dissipation and cool operation of ballast. 6- Cast Aluminum swing out housing,with safety cable retainer. Push release button for quick access to electrical equipment. (No tools required for maintenance.) Button may be locked for limited access. (See option LB1) 7- Semi-specular parabolic up-light reflector. 6 X X 18” luminaire tilt action. W768 : 24” Dia. W770 : 36” Dia. Photometry Access to lamp Access Ballast 12” Certification Mounting & E.P.A. UL. Wet Location. Model# W770 E.P.A: .88 sq./ft Max. weight: 33 lbs.. Installation: Mounts over a 4” or 5"O.D. Pole.X 4”ø tenon. Mounting Light source selection Optional W768 Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. ACA1 ACW1 EC3P EC3W MH (G12) T6 M39T M70T M150T Voltage 120 V 277 V 70W . 150W H.I.D. G12/T6 39W: 70W: 150W: M130 M139 M142 Options Finish 120 V Standard factory prewired (If no voltage is specified) For other voltages, please specify with catalog number. 39W H.I.D. G12/T6 ANSI Lamp code For options details and specifications, please refer to pages 41.42.43 120 V 277 V 347V (Refer to color chart) Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color LB1: RD: Accessories Release button lock Alternate top face disc color same as luminaire. FS: PH1: PH2: Electrical Fuse 120/277V photo cell 347V photo cell (Lamps by others) Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 36 Web: www.luminis.com Sept. 2006 Rev. Feb.2008 L U M IN I S OPTIONAL ACCESSORIES Push Release button lock Option: LB1 General notes: Please specify selected option as a suffix to luminaire model number. ex: W614-M100-WHT-LB1 Each model is provided with a listing of compatible options. Some options may not be compatible when used in the same luminaire. Please check listings. Reflector disc Option: OS For restricted access. Locked push button. Requires 8-32 hexagonal key to release. House side shield Option: H2 For post top Aluminum oblong reflector disc. (Factory installed) Applicable to W632 & W640 Type III reflector Option: RF3 / RA3 / RL3 / PR3 50W / MR16 adjustable down light Available with 120V power input. For other voltages, please consult factory Note:Other down light sources than shown with option DL4 are available. Please consult factory. Light distribution control III light Option: Type distribution R3 refractor IV light Option: Type distribution R4 refractor Semi frosted diffuser Type IV reflector Option: RF4 / RA4 / RL4 Type IV Forward throw aluminum specular reflector.(Single lamp only.) Fuse Frosted lower portion of diffuser. Option: DL1 DL1-277 Note: FS option fuse is factory calibrated and installed with selected wattage. Post mount luminaires: FS installed with pole. Option: DL2 Option: DLC DL1 / DL2 Combination. Quartz lamp restrike Option: QRS Option FS Ballast protection fuse Available with H.I.D. luminaires only 12V/50W MR16 Down light with integral 120/12V or 277/12V electronic transformer. other input voltages on request. Open sealed top cover allowing uplighting Type III Multifaceted specular reflector. (Single lamp only.) Option: LF1 Wall mount light options Option: SW45 Exterior white enamel, and specular aluminum inner reflective surface. The shield is inserted and snaps inside the diffuser. 360º on site rotation. 13 1/4” Adjustable down light (W780 series) Option: DL4 Slope ceiling adaptor All other types: FS is installed with luminaire. Emergency battery pack For 57w & 70w: Consult factory EM42 One lamp: 26w: 450 Lmns.. 32w: 575 Lmns. 42w: 750 Lmns. Time: 90 Mnts -120/277V T 0º C Please refer to page 72 for more details Quartz restrike standby lamp kit. When power failure is restored, it will energize temporary Quartz lamp with progressive dimming until full H.I.D light output is produced. max.100w DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps. 45º hang straight ball swivel for 5/8” dia. suspension stem. luminaires H1 For bollard mount luminaires. 18” Dia. ECLIPSE Light photo sensor Option: PH1 -120V PH2 - 277 / 347V Photo electric sensor, factory installed with the pole or inside fixture when pole is not required. Suspension safety cable Option: STC Additional safety cable, extended 12” beyond canopy Suspension stem 5/8” O.D. suspension stem. STM60 60” lg. STM80 80” lg. For other factory cut to size length add suffix -STM with desired length to catalog# max.120” Lamps & ballast compatibility Compact Fluorescent Lamp Watts Lamp base 26W 32W 42W 57W 70W 85W 120W G24Xq3 G24Xq3 G24Xq4 G24Xq5 G24Xq6 2G8-1 2G8-1 Metal halide Lamp Watts Lamp base ANSI Code 39W 50W 70W 70W 100W 150W 150W 175W T6/G12 ED17 ED17 T6/G12 ED17 ED17 T6/G12 ED17 M130 M110/M148 M198/M143 M139 M90/M140 M102/M142 M142 M57 Quartz lamp restrike Quartz lamp socket for external 120V Option: QS emergency power input. Separate 120V dedicated wiring is included. max.100 W DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps. Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: 954 .717 .4155 Fax: 954 . 717.4157 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999 Page 41 Web: www.luminis.com Sept. 2006 Rev. Feb.2007 L U M I N IS ECLIPSE OPTIONAL MOUNTING AND ACCESSORIES 17 3/4” 4 1/2” ACW1 series EC3W EC3WS Mounting Power 17 3/4” series Mounting Power 10” 3” 3” 4 5/8” 4 5/8” 27” 28” ACA1 ACW1 Pole mount EPA:0.7 Wall mount 6 1/8 ACA1/ ACW1 -1” x 3” extruded aluminum side pole or wall mounting adaptor. 1/2” dia. stainless steel rod support. 10” x 4” o.dia. aluminum tenon. 18 3/8” 10 1/2” 11 1/2” 17 3/8” 7 1/4” 6 3/8” 6 1/8” 6 1/8” 16” 16” Power Power Power Power EC3PS -1” x 3” extruded EC3WS -1” x 3” extruded EC3P -1” x 3” extruded EC3W -1” x 3” extruded aluminum aluminum twin short arm side pole mounting adaptor designed to fit with 4 to 5” dia. poles. 16” lg. X4” o.d. tenon. This option is applicable only to catalog numbers with the suffix LS EPA:0.72 aluminum twin short arm mounting adaptor designed for wall installation, with a set of two cast aluminum mounting plates. This option is applicable only to catalog numbers with the suffix LS aluminum twin extended arm side pole mounting adaptor designed to fit with 4 to 5” dia. poles. 16” lg. X4” o.d. tenon. EPA:0.97 twin extended arm mounting adaptor designed for wall installation, with a set of two cast aluminum mounting plates. Please specify selected option with a suffix to the specified model number. Ex: W624LS-EC3WS-EC5 M100-WHT 23/30”dia. aluminum double adjustable dropped shade 30”dia. aluminum single adjustable dropped shade 30” 23” 18” dia. cast aluminum adjustable shade Pier or short wall top mount 18” 30” 2 1/2” 3 1/2” 2 1/2” 2 1/2” 2 1/2” Set of two .093” thick hard aluminum shades factory prefixed. The underside is standard white enamel to optimize lighting performance. The set of shades can slide along the diffuser to accommodate various landscape viewing angles. Note: The distance between the two shades is fixed. .093” thick hard aluminum factory prefixed dropped shade. The underside is standard white enamel to optimize lighting performance. The shade can slide along the diffuser to accommodate various landscape viewing angles. Option: EC6 EPA:0.44 Option: EC7 EPA:0.25 Compatible with: ACA1 EC3P ACW1 EC3W Compatible with: ACA1 EC3P ACW1 EC3W Short bollard stand. Compatible with all bollard luminaires. 25” Add. PR7 as suffix to the selected bollard model. (3) 5/8” dia. 3/16” thick cast aluminum shade 8” dia. mounting holes for applications where heavy @ 120º traffic requires indestructible 6” dia. materials. The underside is standard white enamel to optimize lighting performance. The shade can slide along the diffuser to 2” dia.power entry. accommodate various landscape viewing angles. Option: EC5 EPA:0.26 Option: PR7 Compatible with: ACA1 EC3P EC3PS Compatible with: ACW1 EC3W EC3WS W788 TO W791 Bollard series. Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 42 Web: www.luminis.com Sept. 2006 Rev. Feb.2007 L U M IN I S ECLIPSE OPTIONAL MOUNTING AND ACCESSORIES Pole mount Wall mount 10 1/2” 4 1/2” 22” 16” W614LS W616LS 11 1/2” 16” 16” W618LS 28” ACW1 Wall mount W624LS EC3WS Wall mount short.arm ACA1 Pole mount EC3PS Pole mount short arm. W722LS Wall mount Pole mount 1 16” W616 W606 W614 W768 W770 W618 18 1/2” ACW1 Wall mount EC3P Wall mount extended. 17 1/2” W624 W708 W712 W722 16” W766 EC3W Wall mount extended. Compatible poles listing. * Note: 36” extension with ACA attachment 24” extension with EC3P attachment Post top mounting Mounting style OAL pole height 12-14 or 16ft. Post top mount * Note 4” PEX pole style PXD pole style PCA pole style ACA1 Pole mount PCA pole style PAA pole style 4”O.D. 5”O.D. PAA410 PAA412 PAA414 PAA416 PAA418 PAA420 PAA510-A PAA512-A PAA514-A PAA516-A PAA518-A PAA520-A 4”O.D. 4”O.D. 4”O.D. Pole height PCA10 PCA12 PCA14 PCA16 PEX10 PEX12 PEX14 PEX16 PEX18 PEX20 PXD10 PXD12 PXD14 PXD16 PXD18 PXD20 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft Post side mount with EC3P attachment accessory PAA410-C3P PAA412-C3P PAA414-C3P PAA416-C3P PAA418-C3P PAA420-C3P PAA510-C3P PAA512-C3P PAA514-C3P PAA516-C3P PAA518-C3P PAA520-C3P PCA12-C3P PCA14-C3P PCA16-C3P PEX12-C3P PEX14-C3P PEX16-C3P PEX18-C3P PXD12-C3P PXD14-C3P PXD16-C3P PXD18-C3P 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft Post side mount with ACA1 attachment accessory 60” PAA414-ACA PAA416-ACA PAA418-ACA PAA420-ACA PAA514-ACA PAA516-ACA PAA518-ACA PAA520-ACA PCA14-ACA PXD14-ACA PCA16-ACA PXD16-ACA PXD18-ACA PXD20-ACA 14 ft 16 ft 18 ft 20 ft For poles details and specification, please refer to pages 140 to 144 Luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 43 Web: www.luminis.com Sept. 2006 Rev. Feb.2007