MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com 1.5SMC SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 550 Volts 1500 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate(duty cycle):0.05% • Fast response time: typically less than 1.0ps from 0 Volts to BV min. • Typical IR less than 1mA above 10V • High temperature soldering: 250°C/10 seconds at terminals MECHANICAL DATA Dimensions in inches and (millimeters) Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) except Bidirectional Standard Packaging: 16mm tape(EIA STD RS-481) Weight: 0.007ounce, 0.21gram DEVICES FOR BIPOLAR APPLICATION For Bidirectional use Suffix CA for types 1.5SMC6.8CA thru types 1.5SMC550CA Electrical characteristics apply in both directions MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. RATING SYMBOL Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,FIG.1) PPPM Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3) IPPM Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note 3) Operating junction and Storage Temperature Range Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated aboveAT= 25℃ per Fig. 2 . 2.Mounted on 8.0mm2 Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 VALUE Minimum 1500 UNITS Watts SEE TABLE 1 Amps IFSM 200 Amps TJ , TSTG -55 to + 150 ℃ MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com 1.5SMC SERIES RATINGS AND CHARACTERISTIC CURVES Ratings and Characteristic Curves(TA=25℃ unless otherwise noted) Fig. 1 - Peak Pulse Power Rating Curve Fig.2 - Pulse Derating Peak Pulse Power (PPP) or Current (IPP) 100 100 PPPM-Peak Pulse Power (kW) 87.5 75 62.5 10 50 37.5 1 25 12.5 0.31x0.31"(8.0x8.0mm) Copper Pad Areas 0 0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 25 50 75 100 125 150 175 200 TA - Ambient Temperature (°C) 10ms td - Pulse Width (sec.) 100000 Fig.3 - Pulse Waveform 20000 Fig.4 - Typical Junction Capacitance Uni-Directional TJ = 25°C tr = 10µsec. Pulse Width (t d) Peak Value IPPM 100 is defined as the point where the peak current 1000 Half Value- IPPM 2 10/1000µsec.Waveform as defined by R.E.A. 50 td 0 3.0 t - Time(ms) 1.0 0 3.0 2.0 Measured at Zero Bias 10000 CJ - Junction Capacitance(pF) IPPM - Peak Pulse Current,% IRSM 150 4.0 VR,Measured at Stand-Off Voltage, V WM 100 TJ = 25°C f = 1.0MH Z Vsig = 50mVp-p Uni-Directional Bi-Directional 10 1 1.0 4.0 400 100 400 VWM - Reverse Stand-Off Voltage (V) 1000 Fig. 5 - Typ.Transient Thermal Impedance 100 Transient Thermal Impedance (℃ /W) Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only 200 1.01 0.1 0 0.2 0.4 0.6 0.8 1 1.2 Peak Forward Surge Current,Amperes 10 100 8.3ms Single Half Sine-Wave (JEDEC Method) tp-Pulse Duration (sec) TJ = TJ max. 10 0 0.2 0.4 0.6 0.8 Number of Cycles at 60 Hz 1 1.2 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com 1500 Watts Peak Power MARKING CODE 1.5SMC PART NUMBER 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 1.5SMC 6.8A 7.5A 8.2A 9.1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 400A 440A 480A 510A 530A 540A 550A 6.8CA 7.5CA 8.2CA 9.1CA 10CA 11CA 12CA 13CA 15CA 16CA 18CA 20CA 22CA 24CA 27CA 30CA 33CA 36CA 39CA 43CA 47CA 51CA 56CA 62CA 68CA 75CA 82CA 91CA 100CA 110CA 120CA 130CA 150CA 160CA 170CA 180CA 200CA 220CA 250CA 300CA 350CA 400CA 440CA 480CA 510CA 530CA 540CA 550CA UNIBIPOLAR POLAR 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 400A 440A 480A 510A 530A 540A 550A 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C 250C 300C 350C 400C 440C 480C 510C 530C 540C 550C REVERSE BREAKDOWN BREAKDOWN TEST VOLTAGE STAND- OFF VOLTAGE CURRENT VBR(V) VOLTAGE VBR(V) IT (mA) VRWM (V) MIN.@IT MAX.@IT 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 450.00 459.00 467.00 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. Certified RoHS Compliant 7.14 7.88 8.61 9.50 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 REVERSE MAXIMUM PEAK LEAKAGE CLAMPING PULSE VOLTAGE CURRENT @ VRWM IR(mA) @Ipp Vc(V) Ipp (A) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 144.8 134.5 125.6 113.4 104.8 97.4 91.0 83.5 71.7 67.6 60.3 54.9 49.7 45.8 40.5 36.7 33.3 30.5 28.2 25.6 23.5 21.7 19.7 17.9 16.5 14.8 13.5 12.2 11.1 10.0 9.2 8.5 7.3 6.9 6.5 6.2 5.5 4.6 4.4 3.7 3.2 2.8 2.5 2.3 2.1 2.1 2.0 2.0 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 UL File # E223026